Search:

If you have a slightly used and no longer needed die set please PM me with details. I prefer to use Paypal F&F since the PO (to get a USPSMO) is 15 miles one way for me.

MOA depending on what you come up with for rogerreloader, I would be interested in a couple of the same boards.

I ill take it, check your PM.

The title says it all, wondering if someone has a used Lee Carbide Deluxe 9 MM reloading die set

I put my powder coat curing oven in one of my fireplaces, no smell, easy to set up and take down. My wife can use the other if she wants a fire.

How about $30 delivered?

I am interested, PM sent.

PM sent

Keep looking, I bought one on this forum for $75 about 6 months ago.

I will take #9 311 NOE with 3 pin sets, PM inbound, Paid by PayPal

PM sent

I will take the Tok brass. PM to follow.

With that much powder coat thickness, you better gave GOOD adhesion or the rifling will strip off the PC. Why not buy a Lee Makarov mold (under $20) and only coat once?

Having done a lot of welding in my life I would recommend one WITHOUT POCKETS, which tend to catch hot flying metal.

,

Once I got it running, I cast with it for about an hour at 740*F and it didn't overheat, most of the boolits did have a light frost texture in the drive area which I don't mind since I feel...

I put mine to work last night. Started with 4 heat cycles at 450*F, then started pouring 725* lead into it. I got to about 25 pours and 740* lead temp before I got all the machining oil out of it...

I paid by paypal 8 days ago and haven't gotten a shipping/tracking notice yet? Anybody else got shipping confirmation?

#19 on the list; paid by paypal at 3:46 EDT 8/8/16

great news!!

I got it to look better by spraying then spraying a second coat of clear over the baked on copper color.

ipijohn: I will take one jhmatthews at charter dot net. No lube groove, BB please.

give the wife the new one and take her old one like I did = win/win solution?

He does on the buys he starts!!

Long before the NOE version was available, I made my own out old an old 22-250 sizing die. I bored a 9/16 (+.002) diameter hole in it 1 inch deep. It is mounted upside down in a HF $50 press with a...

Don't think it is a problem for me since I put the nose in old BO cases mounted to a plate when I spray and bake. I don't coat the bore rider section.