Search:

bump to top

WTB - #16 Muzzle Resizer die (neck sizer) for 303 Savage for a Lyman 310 Hand tool reloader.

The 329 stem aligns with Ideal 311329, a 185gr Spire point,gas-checked bullet mold that I believe was made for the 30-06.

The 414 stem aligns with Ideal 311414, a 150gr spire point gas-checked bullet mold.

The 367 stem, aligns with the Ideal 228367, a 60gr gas-checked spire point bullet mold

The 450 stem aligns with the Ideal 224450, a 47.5gr Spire point gas-checked bullet mold.

The 388 stem aligns, with the Ideal 257388, a 80gr gas-checked spire point bullet mold

The 418 stem aligns with the Ideal 257418, a 100gr gas-checked spire point bullet mold

the 413 aligns with the Ideal 311413, a 169gr Spire point gas checked bullet mold

The 241 stem aligns with the Ideal 308241, appears to a 30-30 158gr plain bass RN cast bullet/

The 466 stem aligns with Ideal 311466,a 153gr gas-checked round nose.

Thank you; now the numbers on the quick ref make more sense to me. I located a pdf showing all the old Ideal mold numbers, grain and a picture of the bullet profile. It appear the 310 seating stems...

I have started to pick up 310 hand tool dies for 300 Savage, 303 Savage, 30-30, and 30-06.

The seating die for the 300 Savage and 30-06 both came with a #366 stem in them. The old Ideal quickref...

This C309-170-F did just fine last fall on a 6-pointer at 100 yards. I was loading gas-checked using IMR3031 with a muzzle velocity of 1790. Bullet passed through. Buck went about 30 yards. 20"...

Thanks BrassMagnet!

Is the decapper that came with the 310 tool 5-die sets (neck sizer is a separate die) the same for all 5-die tool sets (i.e. - can it be used as a universal decapper), or does it's diameter/length...

300 Savage, a very underrated cartridge.

380Auto, looks like you have a very nice model 99G with excellent cast results. I love the Savage levers. I just started casting and am starting with the Lee C309-170-F (best I can tell it's a...

thanks, I've sent him an email.

Anyone know of a commerical caster that sells the Ranch Dog 379-235?

Have a couple .375 Winchesters I'd like to try them in.

I made some progress by using the 38 S&W expander plug and no crimp at all. Same bullets that had been sized to 0.357 improved with the same 4.4 gr Unique load and had 1 keyhole out of 5. 4.2...

I have a Walter P1 9mm that keyholed at 10 yards. Bullet is 356-120-TC that was sized to .357. I have since slugged the bore - .358, so I now know the bullets sized to .357s were too small given...

Be sure to only look at serial numbers above 900,000, when Savage modified the action, extended it from 2.600 to 2.800" to market the longer Winchester cartridges (.308. .284 and .358). Not sure if...

I was thinking the same thing; my .300 Savage 99 kicks much less than my 99 .308.

Very nice. Savage 99 are so well made and usually shoot moa with good loads.