I'm using Lino and Bullets are actually dropping at 237 with coating and all. I also have a Lyman m 31 die that I may try. My only concern is that with the 31 will it open the necks up past .334 and...
Type: Posts; User: Crocks and Socks
I'm using Lino and Bullets are actually dropping at 237 with coating and all. I also have a Lyman m 31 die that I may try. My only concern is that with the 31 will it open the necks up past .334 and...
I have the plain base mold. I wasn't aware that I shouldn't crimp. I will try that tomorrow and report back. No keyholes at 100 will shoot a little further tomorrow as well
So in trying to use the Noe 247 mold in my 16 inch 1/8 twist 300 blackout. Bullets feed and fire reliably and stay subsonic right at 1050fps and will stack like cord wood out to 30 yards or so. After...
Forum: Reloading Equipment
sal pal i will give them a ring in the morning thank you
Forum: Reloading Equipment
jmorris the flippin them into trays really didnt work to well lol and i am using the same foam trays like from midway but i buy them direct from the source. i am using one type of tray for .380 and...
Forum: Reloading Equipment
thanks jmorris i will have to give that a try and see if it works
Forum: Reloading Equipment
i am searching google for the ammo fork but i cant seem to find anything about one or a pic of one.
Forum: Reloading Equipment
i have recently gotten my ammo loading company up and running and am running about 12k rounds per day and am looking for a machine that i can use to make loading the foam trays a lot faster and...
Forum: Reloading Equipment
when you say your processing the brass in the video are you just sizing and depriming or what?
Forum: Reloading Equipment
that is too awesome that dillon is running as fast as a dam camdex lol
Forum: Reloading Equipment
thanks for the comments guys pm responded to rock and pm sent jmorris
Forum: Reloading Equipment
like the title states does anyone have any exp with using an autodrive on a dillion press? i have been lusting over one here as of late and am wondering how finicky they are? wondering how hard it is...
Forum: Casting Equipment
i have an ancient ballisticast machine with a estimated 60 pound pot on top of it. i have drained the pot down and cleaned it the best i could to try and stop a leak in the valves to no avail. i have...
Forum: CB Loads / Military Rifles
all four of these guns will cycle fine using the lil gun and h110 when using fmj bullets just not the cast bullets
Forum: CB Loads / Military Rifles
when trying the h110 and lil gun powders the load was tested in 4 different rifles. it would not cycle any of them. two of the rifles had a pistol length gas system as well. all 4 rifles cycled with...
Forum: CB Loads / Military Rifles
^^^^that didnt work in mine i tried it up to 14 grs before i saw case pressure and still wouldnt cycle and was hitting 1450 fps
Forum: Casting Equipment
good deal doc thanks for your response i have been talking to accurate by way of email about some other molds and saw where they made them for the magma caster but wasnt sure of the ballisticaster....
Forum: Casting Equipment
i have a ballisticast autocaster and am wondering if any of the mold makers here offered molds for the machines. i talked to ballistcast the other day and they do not currently have the mold i am...
Forum: CB Loads / Military Rifles
i got mine shooting and cycling great with reloader 7. bullets were cycling at 950 fps. i stopped with 1050 fps with 10.2 grains and bolt locks back on last shot. im using a spikes tactical with...
Forum: Casting Equipment
well i sent ballisticast a private message and havent heard anything yet. i guess i will try and call them tomorrow and see fi i can get it ironed out.
Forum: Cast Boolits
i was able to get my gun running without hiccups with 10.2 grains of reloader 7. they were mostly running at 1050 fps but had ranges of up to 60 fps under and 30 fps faster. all bullets made perfect...
Forum: Cast Boolits
run five i havent been able to locate any 1680 or rl 7 but i have seen where a few folks are saying 5744 was working for them. i have sourced some of it and should be able to pick it up tomorrow....
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |