Search:

Nicely said

Please provide a link to t
his training

The best place to start your research is ebay. I just searched for wood working tools and there was over 10,000 results.

Find items similar to yours and see if they are selling and for how much....

Toothpaste

I have seen it used for lapping a bolt in an action

I used it on a reloading press that was to tight

Boat tail angles should be about 9 degrees and not more than 11

This is the general rule for all rifle bullets.
Anything more than 11 degrees causes turbulence

This is from books by McCoy and...

Here is a link on ebay with good pictures showing how the hollow base is made
...

I started when I was 6

I taught the NRA junior program at my local club for 14 years. I often worked with kids 6 years old. I also teach archery to kids. For archery, I require at least 8, takes...

Johny

How about some pictures and a link, I cant get the above link to work

4277 is my calculation

I got this in email 2 days ago (Mar 12)

To Receive Your Savings:



Add in-stock products without quantity limits to your cart totaling:

$100 Order or more - Use...

I use Dillon presses, both 550 and 650

For pistol I use a carbide die and do not lube

For rifle I use Dillon spray lube and then wipe the cases off after loading.

Looks like a counter balance weight from a fork lift or tractor.

Goodsteel and popper

I have not had a chance to read everything on this thread but what have read has been very informative and eye opening, thanks and keep up the good work

I agree with 44man. The internal ballistics are a little different between the two causing slightly different muzzle velocity which gives different poi

xringDave

Mine looks like the picture on the manual but the parts that you have dont look like mine at all.

If you have that manual, I would like to get a copy.

There is no link, there is no information on this press. Here are a couple of pictures of the press. Yes there is a lyman 450 buried under there.

The way it works is there is an extra actuator...

I have one that I got off of ebay about a year ago. I am just now getting it setup. It was obviously made in some ones garage with poor welding, but the design is good and it seems to work reliably....

Has anyone ever either cast or swaged boolits for a .177 air rifle?
If so I would like to hear about it.

I have put together a web page with everything I can find about the .45 shotshell including some history.

http://avr-developers.com/45shotshell/

Neat idea, but put a picture of the assembled unit on the web page. I didnt understand at all what it was until I watched the video. I almost left the page saying *** is it, it should be obvious what...

There is an issue with the auto eject on the 450, I just went through this and Alverez helped me out.

In order to install the auto-eject on the 450, a different shell plate is required that is...

I read on another post here that using sulphur as a flux will remove zinc and tin.

Nightal

I just got the unit and no the filler cap is not missing.
I have it partially figured out but not completely. I wish I had some kind of a manual or pictures of one set up properly.

Last week I had a switch fail in my RCBS powered case trimmer, I went to the on line help system, submitted a message, included my mailing address, 48 hours later they said a replacement switch was...

There is a real good web page about an artists SERIOUS attempt at making silver bullets. It was VERY difficult
http://www.patriciabriggs.com/articles/silver/silverbullets.shtml

I have a bunch of trimmers as well, including the gracy and one made on a taig lathe. I also have the lyman version of the RCBS manual trimmer.

I recently bought a used motorized version of the...