Search:

Please remove me from the list. I am number 7.
Thank you for your help!
CATS

Yes and... Sea Salt.

Feed slower to create smaller chips and also increase your air flow. A pvc pipe tee and nipple can be cut to the distance needed to fit between your press and the motor body. With larger holes on...

Have you checked that ALL the screws on your rifle are tight? Is the barrel free floated? Does the stock push on the barrel as the barrel heats up? Is the bedding solid? Is your hold/grip/sling...

How hard is this mix on bright colors? Does it cause the colors to fade faster/slower? How easy is this on wool how easy is this on delicates? Has anyone noticed that it is more/less irritating...

Use 30-06 brass. Pick a brand that you have enough of and convert all of them. So then, when you are at the range you will know not to use that brand of your reloaded ammo in your 30-06. Also, label...

Yes, sit up straight, use enough sand bags to get height. Get better ear gear, you may also be reacting to blast and flinching just before you squeeze the trigger, which could allow the butt to come...

I would scrap it or send it to one of the guys who swage. If I had sold that to you I would refund your payment. When in doubt...throw it out.

Be sure that you show them the ammo that you develop for that specific rifle. Share with them how you cast the Boolit and loaded to the level which that individual rifle shoots best. You now have the...

I like the Hornady puller, easy and quick. I am not too sure about tearing down fully functional loaded ammo. If is factory ammo someone that you know would probably pay a premium for it right now. ...

Make a few old style wooden box trap door traps. Anyone looking onto your yard will not easily see what you trapped, so less fuss from neighbors. You can empty them into burlap feed sack to start...

You may only need a little taxi or tow truck $.

The other guys here have given you good input. That said, how do you KNOW that there are only TWO powders in that mix? If there are two saved powders, what if he "saved" a little of a fast pistol...

Blammer,

You may want to look into Bob Wesley's video, "Indirect Aiming for Bowhunting" copyright 1983. The video is a little dry, but the content is past solid. You view it and translate to...

Stay back from the end one thread valley. This will leave a place for the dope or tape to squish to when you put it together. If you go all the way to the last thread, strips of tape and drops of...

Hold on there friend, you are thinkin' about too much work. Scoot your chair over to the back door and leave those heavy logs out in the back yard. Don't throw your back out dragging stuff into then...

If you are fixing threads you may get by with a small file to clean up the mess and then a hardened nut as mdi suggested. Use a good lube with the nut so that you don't gall it all up worse. Less...

Lay off. You left them in play. Fun for you, fun for him. Just think about the great story he gave you to tell!

But then again, I am not the one to clean these up. :)
CATS

Are you doing this outside? A Bud of mine ran his Midway 1292 on his carport with no lid. Everything within 6 feet of it became coated with "dust". He found that the dust escaping did not extend...

Hello!
Where on the Bayou are you? Are you going to sell only over the net or FTF? What kind of supplies are you getting from your buddy?
CATS

Is your problem happening with the same brand of brass? *When I had one of those, tight primer pocket brands had more hang ups unless I was gentler/slower with primer starting. *They also needed more...

You will want a couple pairs of leather gloves, a short shovel, a good garden trowel and one of those three tine garden tools to help dig those WW loose. You may find that a dust pan is good to rake...

First, relax. You likely own the drill, drill bit, bolt, socket, extra flat washers for spacers that you need. The guys here have given you good advice. You may also find that once you pull the rim...

Can we get one of these to drop WW at .379 ?

I was surfing the net once and found Shotgunworld.com. They had a lot of info on loads and press fixes.