Search:

I've used these

https://smile.amazon.com/gp/product/B00QGMESHM/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

Here is another option/s for extending the shaft of the motor


https://www.youtube.com/watch?v=R8z2WjhK5lE&t

All the people making face shields, took the market by storm and they bought up all the filament. I'd be surprised if even 20% of all those home made face shields were even used. I digress, ebay...

I also have just used the same Filament for case feeder on my 550, it was excellent, better than prusament, the color is close as you can get to Dillon, the supports were easy to remove also. I'm a...

Here is another

1.6mm wire 16mm OD should yield 12.8mm ID x 500...

Thanks for Measuring.

Well if there was a group buy, this is pretty close

1.5mm wire

https://www.tevema.com/en/webshop/trekveren/trekveren-500-mm/trm033

I haven't tested this, but this looks close enough.

The 20mm OD should yeild ~ 1/2" ID

https://www.aliexpress.com/item/32869269988.html?spm=2114.12010612.8148356.47.4a3b2309BtKFWd

254457

Spackle & caulk are our friend, hide most mistakes.

Interesting approach, I never thought of mounting from the ceiling. If you try mine, let me know how it works for you, thanks

I looked at the bf_v2_mount_hang_var_bf_side_WH120, it appears to use 4 screws to bite into the threads of the bolt, just 4 little screws holding this together. I wouldn't recommend it, this design...

Agreed, very awesome and a working concept model too.

I have finished my 6.5mm Collator & Flip plate, works great.

https://www.thingiverse.com/thing:3547180
https://www.thingiverse.com/thing:3547193

Send me a PM or email

You can remove the holes fairly easy with meshmixer, use the selection tool over the hole, select the faces, delete, then use repair.

I'm going to echo that, thanks for starting this project and sharing it!

This was not a simple just print and play design, tolerances and fitment issues are all over the place. So even if someone sends you the parts, they many not work without modification and/or...

You won't out run the MBF motor, so the # in the tube doesn't make a difference. I run the MBF on my 1050 fully automated 2,000+ rd hour

The 6.5 Creedmoor Drop Tube Big Switch Small Spring has the wrong ID, I fixed the drop tube.

https://www.thingiverse.com/thing:3522571

Thanks

I have the same question, there is not a single comment on thingiverse or anywhere that indicates the type of spring to use for the flipper. No one can reference a Hillman group spring?

Thanks