Search:

Navy here, thanks to all who have served and to all still in service.
I went and visited my dad at the Veterans cemetery today. Flags in front of all the head stones, lots of visitors there as well.

I took the advice and sized up with a tapered die that Lee uses. I did not anneal before and things went very well. I did lube before, then I "bell" the necks, backed off and re-lubed and used a...

I picked up a Savage 110 that has been barrelled to 35 Whelen. Also picked up 2 molds, Layman 3589 and a NOE 359-190 HP. The NOE boolit is powder coated and shoots well with a load 4350. Have not...

Cast a few 300 gr for 35 Whelen, resized some 30-06 to 35 Whelen. Measured and remeasured throat depth for the 300 gr, looks like they will seat into the case a bit. Cleaned up a bit, then messed the...

My search tech is not to good, thanks.

I picked up a Savage 110 that was re barreled to 35 Whelen. I did buy some factory brass , but had some 30-06 brass that my 110 in 30-06 did not like. some thing about the rim would make the bolt...

What about a spool gun, uses the power from you stick welder.

I have started to load new .410 hulls with "00" buck. Made an over shot card from sheet plastic, think thin cutting sheets. Picked up the roll crimper from reloaders network . I use was to lube with,...

Prays for you and yours in this of sorrow.

MiHec does include all pins, yes solid as well.

Mine is in as well, BIG THANKS TO bluejay! And to MP MOLDS!
Now to get some cast!

Mine is due on Monday as well, but this "time frame" is full of worries as things are in the hands of DHL and we know how things can go bad. I think of all the stuff that can go bad, makes the wait...

Paid and now the longest wait.

Good report Gamsek, thanks much. Now that is out of the way, cant wait (but will) for the invoice and than the long wait for shipping.

HITEK (No Lube Grooves) HP-
10)jefhover at tds dot net - HP -.311- 4 Cavity PB - All Pins - 37122- NLG
So this is going to be a 3 cavity? I am OK with that.:drinks::bigsmyl2::redneck:

Yall know you can sell your lube groves. There is a market http://castboolits.gunloads.com/archive/index.php/t-24972-p-3.html

[smilie=w::bigsmyl2:

This has been my experience on some molds.

I have better than a dozen of the makers molds, the wait sucks, but is WELL worth it. Stuff happens.

As far as the wait, I have close to a dozen molds from this maker, the wait is always worth it.

:shock::groner:
I have been in on enough of these to know, but still hate the wait.

[smilie=w:[smilie=s::bigsmyl2:[smilie=p::awesome::2_high5::guntootsmiley:

That is a nice rig, good job.
Thanks for posting!

Browning A Bolt in 7mm Rem Mag with a micro fit stock, and yes it is Correct Handed!

Please sign me up for HITEK HP

jefhover at tds dot net - HP -.311- 4 Cavity PB - All Pins - 37122

Thanks!