Search:

Had a 1891 2nd. variation in .32 rf./cf. If I remember correctly used a .313 heel bullet in the shorts and a .299 hollow base inside lubed bullet in the long case. Load was 2 grs of Red Dot, or...

G grades were most likely fitted w/ Damascus Bbls. But were sometimes found w/ Royal steel Bbls. From what I can see they look to be Damascus, probably blued/browned over.

A Hollis double barrel 16 ga. percussion made in 1834. I've taken a few Pheasants with it over the years.

Same thing Happening here, ....Humidity ....! Powder wants to stick in the 410 press drop tube. Be careful! I gave it a couple days, humidity dropped, no more problem.

Called White Headed Buzzards around here!

Gave up on anti seize many years ago, clean, lube threads, and apply teflon tape to breech plug threads. Stops gases from working into threads. Plug comes out with ease, no more carbon in threads to...

You can open the crimp with a awl and needle nose pliers. But, a lot of work for low quality hull. I would cut 'em, save the primer, powder, wad and shot and find some once fired AA's or Rem. hulls....

Great, now everyone has a 25-25 reamer! Just waited 11 months for a reamer. relining the chamber of a Stevens for a customer.

Try here,www.gunrepaircenter.com suppose to have all the parts from Ilion.

Looks to be for the Remington model 33 and 34. Have a few of 'em myself.

Colt Officers Model Match, smoooth, and breaks like glass!

Ok, 275.00

I'll go $225.00

Wow, H-5066, shot up the last of that many years ago. Also good for keeping the "skeeter" away!

Step back and think about this one. Most likely blued over damascus, and if hot bath blued, ribs and solder/joints may have been weakened.

Great gun, but a 12 ga. 26" skeet gun is no longer in Vogue. I think you would be hard pressed to get that kind of money out of it.

I've had 5 hernia operations since '83, some with, some without mesh. No problems, couple weeks of light duty and back at it.

Brownells use to sell a jig, might still.

AA 2700, tops in accuracy and velocity.

Chamber needs to be burnished! We get this every year with the 742/7400 Deer hunters, shoot at Deer, cold air rushes into hot chamber and condenses, then rifle is put away. Next year case won't...

I'll take the whole lot, PM inbound.

A blast from the past, haven't seen any of those in years.

Almost gave up on that mould myself until I read an old Lyman book that stated that this bullet needs to be pushed fast. When I did I was impressed! 16.0 grs of 296 in a Browning 92, doesn't get any...

No, CCI 157, and Remington 57 primers were used in the old style "asbestos like" base wad SP hull. #97 Remington primers were their 209 size primer for the RXP, Blue Magic, etc. hulls.

In my Browning -92 favorite load is 158 JHP or 357446 w/ 16.0 grs. ww-296 and a small pistol mag. primer.