Search:

I'm interested inusing JB weld to bed my Winchester Model 69A, it has the original wooden stock. Should I try it? I've never bed a rifle before.

Scroll down, you will see a desert eagle with a foregrip frame.

http://www.uzitalk.com/forums/showthread.php?62043-Buttstock-on-a-Desert-Eagle

delete

delays on the project, the first prototype didn't work out so well, I scrapped it. Now working on the second design, hopefully I will have pictures by next weekend.

thank you for replying, I guess I got lucky with those 2 hits, the target was a large sheet metal painted red about the size of a door.
what process do you take to load your ammo to shoot 4" groups...

I was advised to start at 50 yards to get good groupings then work my way out, so I will do that next weekend. Any advice on loads for long distance?

I was shooting free hand at the time with scope, the target was a large sheet metal painted red almost the size of a door. I was only able to hit it twice and about 5 really close ones and the other...

Quick question for reloading, I just mounted my scope and looking to hit 300 yards.
I've tried in the past with iron sights with a few hits but most of my shots deviate quite far from the target,...

John, how did you load your ammo for that 700 yard hit?

Quick question for reloading, I just mounted my scope and looking to hit 300 yards.
I've tried in the past with iron sights with a few...

Thanks for the link, too bad they don't have this on opticsplanet, I bought $50 credit for $25 plus it's free shipping haha.

Has anyone tried this mount? it's made of stainless steel.
http://www.jackweigand.com/sswhpmnts.html

Spartacus - Can you share a link of your Leupold scope mount? I'm purchasing a Leupold FX II...

Thanks for your time and advise John, I will go ahead and remove the hot loads on the 440gr and try 37-38grs of lil gun. I will also make 10 loads of the 700gr 30-34 gr of 680.

Hi John,
Sorry to hear about your meet up, that must be quite frustrating!
I tried searching for more information before I started loading, I was able to find some feint but helpful information...

John,
Bullets were purchased from the link below
I went ahead and bought 1lb of LilGun to try a few loads, please let me know if these loads are adequate, if you feel any loads are not safe I will...

Hello, can anyone help me with some load data? I'm unable to find any info on
335 Grain Truncated Cone lubed no gas check
440 Grain Round Flat Nose lubed no gas check, I do see data for 440gr hard...

Hi all, I'm looking to buy an used RCBS Lube sizer. Anyone have or used one of these?
Pros and cons would help =]

thanks
...

Thanks John, that's what I calculated the average between the 440 and the 500 loads. Appreciate your help.

Hi John, this is the link to the 460 grain I have.

http://www.mattsbullets.com/index.php?main_page=product_info&cPath=66&products_id=256

I'm looking for loading data for the 460gr with lube and gas check. I'm unable to find anything, when google search most of the information comes up for the 460 S&W. Some of the powders I have...

Can you elaborate on how you were able to save $150 off the XL 650? I'm currently very interested in a Dillon 650, contact me if you are not using yours. :)

how's this Leupold FX-II Pistol Scope 2x 20mm for $235 shipped with rings?

http://www.calguns.net/calgunforum/attachment.php?attachmentid=96699&d=1304624684

Cool thanks for the tip, nice set up Paul.

Anyone had experience with Leupold FX-II Pistol Scope 2x 20mm?? Thinking about it if you guys have any advice.

Thanks

Hahaha, my bad! when i rubbed it off it was a bit gritty thought it was rust!!! it's awesome being a noob :drinks:

Just read the story, that's pretty intense with a happy ending!

- Don't know about the S&W500 being too much gun and all, I'm 5'9" about 155lbs I have 2 S&W 500s. I have the 4" with muzzle break...