It’s super easy to get zinc wheel weights. I have buckets of them pulled out of my lead weights. And no body wants them
Type: Posts; User: Jniedbalski
Forum: Lead and Lead Alloys
It’s super easy to get zinc wheel weights. I have buckets of them pulled out of my lead weights. And no body wants them
Forum: Our Town
I live in cape county. Probably close to you. Most old church sites you can go but have been hunted to death. Pilot knob is close that you can go . Not the park but the 2000 acre plus’s right across...
Forum: Cast Boolits
They need to be sized to .311 or .310 to chamber . My savages bolt guns like .311 but some might like .310 or .309
I have a star in 9 mm. It’s a very nice and easy to shoot
Forum: Muzzleloading.
Sompthing I haven’t seen used is lemon oil or orange oil. I did a 3o3 Brit 4#2 with lemon . Rubbed let sit . Steel whoop it and apply more rubbing it in till hot. This turned out great .
Forum: Cast Boolits
This is the first time in many years I haven’t loaded in three or four months. Not a single round . Getting lazy I guess. Want to go out and cast 100 lbs of assorted 9 mm and 38 bullets. I have I...
Forum: Cast Boolits
Like I said I used this search bar on the front page before. I would type in say 223 long range loads and it would come up with post on this site only with 223 loads. Some times it gave me to much of...
Forum: Cast Boolits
It won’t work at all. It just goes back to the page I was on. Instead of the page with say 223 long range loads I just typed in to the search
Forum: Cast Boolits
I have been on this site for years and it always worked before. It just quit a few days ago
Forum: Cast Boolits
Just wondering why the search functions on this site is not working for me. I had loads for 308 and 223 on my phone saved from this site and my phone died. I lost all my saved info on cast loads and...
Most all us companies that make 7.62/39 rifles use a 308 barrel .
Forum: Factory Rifles
I got the high point 40 s&w and really like it. It shoots the lee .401 175 tc with 45/45/10 lube and plated rainier 165 gr and other 165 to 180 gr plated bullets very well. The powder that really...
Forum: Cookin' Recipe's
I have never made it like this. I just put two fried eggs on any fresh bread I have salt and pepper. A nice quick snack or supper
Forum: Single Shot Guns
Size the bullet .358 .359 should shoot better.
Forum: Factory & Surplus Powder
I like fast powder in my nines . Use bullseye 3.5 to 4 gr with 115 to 124 gr bullets. I have tried slower powder like hs6 and others but it only shot better in my 40 s&w carbine. In my pistole in 40...
Forum: Factory & Surplus Powder
I use Blc2 for my sks 7.62/39 with 124 to 150 gr soft points. Also used in 308 and 223 works good for me
Forum: Factory Rifles
I have one made on a German k98 Mauser with the heavy target bbl. back in the 80’s a lot of companies and gun smith where taking the 98’s and turning them into big game rifles. The 308 Norma mag and...
Forum: Gunsmithing Tips & Tricks
There are many ways to rust blue. I once did a cold rust blue I got from my gun smith . Worked great on a double barrel pistol I did. It came out a Beautiful chocolate brown . I do know on rust...
Forum: Military Rifles
I bought about 20 of the type 38 years ago in the late 80’s. I cleaned them all up and sold them for 69$ to 79$ each. I had a very nice one I sold for 90$. I was only paying 19$ Each at the time. I...
Forum: Our Town
I like my Vienna sausages cooked in bbq sauce untill the sauce gets nice and thick. Also a dash or two of hot sauce is good.
I use the NOE case expander instead of the M die works great. You still will have problems with thick brass and oversized bullets. The Noe expander or M die will just make it seat easier and not...
You can do two or three things. If they don’t chamber or are tight use the factory crimp die. If you don’t want to size your bullet down with the factory crimp die pull bullets and find thinner brass...
Good shooting. Looking forward to warmer temps also.
Forum: Factory Rifles
I would use it as a fun target gun Fmj’s or lead tip 55 gr Or reduced lead loads. One thing I like about 223 you can shoot good out to 500 yards if you need to or 50 yards reduced loads for small...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |