Search:

Can anyone tell me what this is?

It looks like 8mm Mauser but that's my guess

Thanks



313267

I finally got a set of RCBS dies to try. I resized the previously reformed 30 06 brass and was able to fit into a Vet bring back K98 Mauser and a K98 Mitchell Mauser but unable to chamber in unknown...

I have been thinking about buying a roll sizer but wanted to hear from someone who has one first. I was thinking about using it for 9mm. Anyone have one? TIA

I have tried my formed brass in 3 different chambers and the result is basically the same. 2 are rebuilt/reworked rifles and the other a Vet bring back. the Vet bring back is tight but able to close...

I made some using 30-06 brass to try using a Lee FL sizing die then trimmed. End result wouldn't chamber. The shoulder needs to be set back. Should I try a different die for reforming? Grind off some...

The battery housing looks too short for AA batteries. I had an Eotech that used "N" batteries.Something else to look at.

I have had great luck with Metalform mags.I shoot PPC so the mags get lots of use and dropped on concrete and they keep on working.

Maybe try less belling of the case.

A picture of the bottom might tell more. It looks like a decapping/belling die.RCBS made 3 die sets.The first die was for sizing,second for decapping/belling and third for seating/crimping.I hope...

Per Standard Catalog of Smith & Wesson 4th Edition serial number K136691 to K175637 were made in 1952.

I bought the iclever IC-JB21R following the link from above: Amazon https://promopure.com/iClever-18000m...y/p/G0AJONGLRQ
Right above Product Information it gives a code to buy for $48.99.They...

I've got a few with wood screws if you still need them.

I was looking at a Hammer Drilling Double Rifle and the rifle barrel was marked 108/49 and wondered if this would be similar to the 9.3X72R? The rifle was marked J. P. Sauer & Sohn.It has 2...

Hi,

It's a buildup of lead on your forcing cone. A "Lewis Lead Remover" works the best for me to remove the lead buildup.Some people like to use a smashed shell casing to clean the frame area...

I agree with too much lube

If it's like the one listed in the above link I have one you could borrow.

Good Luck, Ken

I have a partial box that is headstamped EC 43 but have no idea where it came from. There are 2 places that use the EC abbreviation that I found. Eau Claire Ordnance Plant, Eau Claire, WI and...

It was made in 1972

I run 300 BLK. in both carbine and pistol gas systems using a standard 223 buffer and spring.It sounds like you are having a gas pressure problem.You can put a piece of vacuum tubing on the gas tube...

I use a Uniflow too and have no problems.

My guess is 5927

Tie a piece of dental floss around it and it will die and fall off. No pain,no blood and no infection

Modern Reloading,Second Edition for 357 Herret,158 gr. JHP
Starting Load FPS Max Load FPS
ACCUR 1680 30.6 1,944 34.0 ...

This was my first group buy also and they didn't send tracking information.I requested tracking from them.On their website front page go to the bottom and look for "Contact Us" request tracking and...

Sounds like you have a solid rivet and those are used with an air chisel and a bucking bar.A special bit sized for the head of the rivet in an air chisel and a bucking bar on the back are used to...