Search:

10 parts 99% isopropyl alcohol to 1 part of liquid lanolin. Wait untill the alcohol evaporates off.

Sent from my SM-G975W using Tapatalk

Accurate 4350, had 1/2 a pound given to me but only have a 30-30 to load for. Would accurate be close enough to IMR 4350 to use that data? Want to load cast 113gr and factory 150gr.

Sent from my...

Reloaded 50 44-40 rounds with a 200gr bullet under 6.0gr of Winchester 231.

Sent from my SM-G975W using Tapatalk

I load for 44-40, rifle and revolver. I use the Lee die set and don't have any problems. I use cast bullets that are sized to .429

Sent from my SM-G975W using Tapatalk

I made a wooden box for mine.https://uploads.tapatalk-cdn.com/20201108/279788f8f6a0a94f50eab1ca1966e735.jpghttps://uploads.tapatalk-cdn.com/20201108/bf8d4b3c1deb4242e6201c2ca606911d.jpg

Sent from...

This is a paid site that I use. Found some really good data. Here is the link....

What does the top end of the die look like? I am thinking it could be a trim die.

Sent from my SM-G975W using Tapatalk

colonelhogan44 I sent you a pm.



Sent from my SM-G975W using Tapatalk

Can you post the stl file on Thingiverse?

Sent from my SM-G975W using Tapatalk

Dual PID controller, box built out of wood. 1 side controls my melting pot the other co controls my hot plate that is use to pre warm molds....

What do you use the whisk for?

Sent from my SM-G975W using Tapatalk

Not so much in the reloading room, but I made a 12ga hull conditioner/trimmer in the garage out of a piece of dowel and a bolt with a snap off blade for the trimmer part.

Sent from my SM-G955W...

This works very well for me, but use 99% alcohol. Have tried a lot of different case lubes and keep using this one. The only other one is 10 parts 99% alcohol and 1 part Lee case lube.

Sent from...

Been thinking about ordering but cost is around $100 CDN.

Sent from my SM-G955W using Tapatalk

Loaded 20 rounds of 303 savage.

Sent from my SM-G955W using Tapatalk

I load 120, 125 gr boolits for my glock 17 gen 4. I powder coat then size.

Sent from my SM-G955W using Tapatalk

I just looked in "The handloaders manual of cartridge conversions, Fourth edition" and did not find 375 Rimless Nitro Express.

Sent from my SM-G955W using Tapatalk

I use silicone oil that you buy for treadmill belts. https://uploads.tapatalk-cdn.com/20190106/205fefccc9ec9e7cc306555b87edde39.jpg

Sent from my SM-G955W using Tapatalk

Loaded up 50 12 gauge round ball slug rounds.https://uploads.tapatalk-cdn.com/20181230/db7492525e3f2c541741b64d61561001.jpg

Sent from my SM-G955W using Tapatalk

Powder coated and sized 600 round for 3 different calibers.

Sent from my SM-G955W using Tapatalk

Never heard of Alpha5v4. Please tell me more.

Sent from my SM-G955W using Tapatalk

Let me know how it works for you. I'm not sure if 150w is enough.

Sent from my SM-G955W using Tapatalk

I have been thinking of trying this out. But not sure how big I need to go. This 1 is only 120w. Found it by googling induction brass annealing....

I made one, I printed a number of pages and then used a binding machine to turn it into a book. I put the same data into an excel spread sheet on my computer.229576

Sent from my SM-G955W using...

Finally got around to size and gas check 450 113gr 30 caliber bullets. Next to powder coat. Also did a little cleaning and organizing of the reloading bench.

Sent from my SM-G955W using Tapatalk