Search:

I always used olive oil..

Either buy or cast some 460 gr slip fit conicals for that rifle. you will be amazed at how accurate it will shoot them.

That's a bargain. did he have one pr made or made only to order.

that is a really nice looking mold. can't wait to see some of the boolits:-P

http://i133.photobucket.com/albums/q62/legginMF1/target/Target-1.jpg UC this was my first time out with my knight wolverine 22" barrel,NEGC peep sight 75 gr RS and a .460 NE conical at 50 yds.all...

i have seen your slip fit concial shooting, which is outstanding.

Bh 209 will work fine in your rifle with a slip fit conical and a wad/ shot card. both Bh209 and 777 IMHO should be used with a wad/shot always, since both powders are much hotter burning than say...

UC, pretty much has it covered as far as QLA's are concerned. you slugged the barrel. so a sized bullet slightly over that will give you a nice slip fit and stay on the powder.. good luck

Your right always better to be a bit over. My knight 1:28 shoots the NE 460 gr( slip fit) lights out with 75 gr Pyrodex. hope you can get that 460 gr conical to shoot in that T/C. good luck

The T/C rifles are not the best big lead conical shooting rifles due to the deep QLA on the end of the barrel. if you want to try a full bore lead conical, the 1:28 likes a heavy one 445-500 gr....

i am looking for a bullet that will shoot accurately out to 150 yds in the 275-300 gr range..who makes that mold you mentioned.. thanks

Anyone using this bullet along with a sabot in a 1:28 twist inline? looks promising..

Corey, i know your trying to save a few bucks, if that knight is a 1:28 .50 cal you really need a longer bullet. .445-.500 gr in front of 70-80 gr pyrodex. i have some .503 .460 gr NE bullets if you...

I shoot the .460 NE bullets from my Knight wolverine1:28, 22" GMB barrel with 75 gr pyrodex with outstanding accuracy. the bullshop .460 and the .445 UC short are also good bets.

It sounds like the sabot wasn't up against the powder. swab your bore between shots. i use a 50/50 mix of windex and 91% alocohol, just slightly damp between shots with pyrodex. it will leave a soft...

tRY A .460 gr no excuse, there tac drivers in my wolverine with 75 gr pyrodex.

Forgot to mention, i wanted to try 777 is why i bought the shot cards and i know it burns hotter than pyrodex!!

i bought some 510" 1/8' shot cards recently. i used to shoot a .54 renegade with pyrodex and maxi's and now have a knight wolverine that shoots .460 conical excellent with .75gr pyrodex. i have...

I am A T/C fan, but the omega is not a good candidate for conicals.do some research and you'll know why. the yellow sabot your using with the SST'S do not usually fit T/C bores well. you might try a...

I was wondering, why you shoot the 500 S&W 440 gr paper patched and not naked ? is the bullet not designed for it. poor accuracy.. Thank you.