back to the top
Type: Posts; User: mdevlin53
Forum: Completed Deals
Like the title say looking for a Parker-Hale PH 7 or 7a. I know its a longshot but just perhaps a member has one in thier parts bin or knows where i could find one.
Thanks
Mike
Forum: Single Shot Guns
Thanks for all the replies. I have been looking around the net and i have found out a few things about this receiver. it seem like it was a greener shotgun once. looks like there are a few remains of...
Forum: Single Shot Guns
This is the sight on a greener martini that was converted to 444. I would like to try something different for a rear sight. I bought the rifle on this site from a fellow named Tunnel. The rifle has a...
Forum: Completed Deals
http://www.wisnersinc.com/part-catelog/
no bolt but some internals there
Forum: Completed Deals
284689
.368 and 193grs coated with alox/jpw. I have 120 on hand at the moment. comes from a Accurate 37-193 mold
will this work for you?
Michael
Forum: Completed Deals
I'll look after supper and see how many i might have,193 gr 20:1 if I recall correctly.
michael
Forum: Boolit Lube !
I have been using Alox and 45/45/10 lube for years. The one thing I don't like about it is that the Alox lubed bullets seem to attract dust and lint. I just tried something a few days ago. After the...
Forum: Completed Deals
I don't have paypal. US postal money order or cash. Check is ok if you don't mind shipping until after it clears.
if the above is ok with you send it to address in PM
Forum: Completed Deals
Lot 1 lower priceSpoken for
UTG 4x32 Mil dot lighted reticule scope
Ruger 4x air gun scope might have been mounted but never shot.
AR-Stoner one piece scope mount
50.00 takes it all
276188
...
Forum: Completed Deals
Last week I built a handicap ramp for a fellow that dropped a tree on his wife( she is pretty banged up but recovering from a broken leg hip and shoulder). I did not charge him because he is a good...
Forum: Completed Deals
I know its a longshot but id anyone has one in the parts bin please let me know. they are bot in stock at Numrich arms but i thought i would take a shot here first.
Michael
Forum: Completed Deals
pretty sure i have an extra i will look in the morning. will let you know
Michael
Forum: Completed Deals
256955256956
Maybe close to 200 i did not count them.
405 grains and i think pure lead. some have green bar paper and some plain old blue line loose leaf paper. lubed with Rooster..457 is what i...
Forum: Completed Deals
I might have some i could send you. i'll look sometime this morning and let you know what i have.
Michael
Forum: Completed Deals
I bought a lee push through in .314 and used a split rod with emery paper and a pistol drill to make mine. did not take long and works well.
good luck
Forum: Single Shot Guns
I too have a 9.3x57r but mine has a .365 bore. I bough a 37-193 B (drops at .366)mold that was designed for the 9.3x72r but it works well in may 33.
I have tried a 14g load of Trailboss (using the...
Forum: Completed Deals
Tim
If you are loading projectiles that are .365 then they should work. That's what i use. I cut about a half inch off the base so i could use them on the 57 mm cases and i am able to load both...
Forum: Completed Deals
Buffalo Arms shows CH4D 9.3x72R (360) in stock. It is what i bought to modify for my 9.3x57r
Forum: Cast Boolits
Yesterday i annealed all 80 of my Federal cases dried them out and re-tumbled them. This morning i ran them through the FL sizer die and checked each one in the chamber on my rifle. They all...
Forum: Single Shot Guns
I did make a trip to the hardware store
4mm is to small and 5mm is to big.
The existing screw fits into a 10-32 nut but is loose, a 10-32 screw will cross thread in the hole on the bottom of the...
Forum: Single Shot Guns
I have a M33 rolling block and the installed sights are pretty poor. so I was able to buy from a member here a Lyman peep that matches the finish and is the correct height. Now to mount it.
The tang...
Forum: Cast Boolits
So i did some tinkering this morning.
Measured all my #2 shell holder and they are all within a half thousandth.
Took a thousands and a half off one with the mandrel and sandpaper trick. No joy....
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |