Search:

I have done this conversion on a threaded barrel russian .
Oddly enough the first one i just rebarreld and it ran fine with NO other modification. Would only run on full power 357 magnum...

That's broken........ send it to me for proper disposal.
I have fixed one that had the same problem. Dont need to worry about heat damaging the rear of that action, just tig the ears back on with...

The inside of the bolt is cut in a similar fashion as a safety feature... prevents firing pin from contacting primer unless the bolt is closed.

This is what I would do. That said I have installed many dozens of thread inserts in cylinder heads, from lawn mowers to V10 Fords. All have worked well.
As a much younger man I galled the...

I tig weld the bolt face and re machine to the proper diameter. With the bolt frozen in a block of ice there is no need to reheatreat. I have done a couple by soldering in a bushing also.
The...

If the truck is not 4x4 the front axle is NOT up to the task. Even the 4x4 is marginal.
I have 2 F250 s with the diesel a 1985 with the 6.9l idi and Banks turbo. 890k miles and still love it. Also...

A Drury University ball cap with tinted safety glasses on it. Pockets contain wallet, benchmade knife, Ken onion knife Zipp lighter, Bic lighter, pocket change including a Bicentennial quarter I have...

The proper answer is "you have found the reason Cerrosafe exist".
My answer you be you have found a new challenge that sounds like a lot of fun. I would buy it if the price were right.

Did the ball on pop before the bullet struck? I suppose mabee it did. Have you never seen a ball on pop at random before, you have to remember this is in the hot sun and the balloon is taped to a...

To clarify my statement all 1891 mausers have the spring loaded latch inside the trigger guard. The later ones have a lock bolt in front of the mag. Inside the front of the trigger guard there is a...

The magazine lock bolt should not come out. Just turn 180° the latch is easy enough to modify for field use. Remove the trigger guard and drift the pin out that holds the latch in. The "button" is...

I think I have a new favorite sixshooter. The business card was what I had handy.
Should work nice at our clubs monthly poker shoot I think.

Loaded up some RP once fired brass with a Lee 125 fp tumble lubed with 45-45-10 over 4.0 grns of Old Green Dot with a Rem spp. The results were good. I have tried several other combos with decent...

Some time back I rescued a couple of old Smith wheel guns from a buddy's parts bin. Both were in about as sorry shape as an old Smith can get, out of time lots of endshake and pitted bores. You know...

Find a local Smith to cut your barrel for the rim, and 30-30 brass makes a fine replacement for the 6.8spc. Short trip through the fl sizer and trim to length. Then you have a 6.8spc rimmed. We all...

32ws, if you don't like it you haven't shot it. The best cast boolit cartridge there is. Find one with a good bore and you are set.
I have found it not to be real picky about powder selection....

I'll take seconds...

Let me know I you plan to sell.. looks like a nice little round.

Or how about my 13 year old with a mini gun... she had the giggles all the way home.

Does this count.. 75 mm field gun. Lots of fun

Sounds like a good plan. 5.0 gens should be a great place to start. I suspect you will find the load you are looking for between 7.5-8.5 grns. Good luck in your endeavor.

2 years ago I found a deal on some magazines for my Star model super and bought 5. Tried them all out and found all worked well, loaded all 6 up and put one in the box with the pistol. Put the rest...

He shouldn't have to, as large pistol primers are shorter than rifle primers.

I use the Lee 125 grn tc for the 357 mag in mine loaded over Blue dot in 9x23 winchester brass. Shoots as good as the kids can hold. My 7 year old nephew killed a nice little doe with it last fall,...

I am a wealthy as a figure I will ever be. House paid off next year, married to my high school sweet heart, oldest leaves for Navy basic training soon. My next is graduating high school tomorrow, ...