Try moving the front sight to the left
Type: Posts; User: rond
Forum: Military Rifles
Try moving the front sight to the left
I've had mine for around six months and the only problem I had was with the Federal bulk ammo not cycling the action. Other brands work great.
Forum: Our Town
You just need to get in shape. I'm 71 and still ride. I have 4 motorcycles and enjoy all of them.
Forum: Cast Boolits
You can trim your brass shorter, that way you can still crimp in the groove. I do that on my Marlins as there is almost no chamber throat.
Forum: Leverguns
I trim my cases a little shorter for my Marlins.
Forum: Our Town
Pull the bullet and powder from one of your rounds and seat the primer again. Put the primed case in your gun and see if it goes bang.
Forum: Cast Boolits
I would tell him to check Missouri Bullet Company
Forum: Leverguns
That's my go to hog gun, drops them quite nicely.
Forum: Our Town
I use Walmart Family Mobile which is Trac Fhone. I have very limited cell coverage at home so I use wi-fi calling.
i screw the seating stem down and seat the boolit without a crimp. After seating all the boolits I screw the stem all the way up and then adjust the die down to crimp. You don't need a different...
Forum: Cast Boolits
I write caliber, boolit weight, powder and charge weight on masking tape and stick it on the box or jar
Forum: Our Town
I have an old lawn mower that I pipe the exaust into one of their tunnels, seems to work fine
Forum: Leverguns
If it were me I would start at .430, you can always size down if needed.
Forum: Rimfire Area
As long as I load the magazines per the instructions, mine works great. Lightweight and it shoots better than I can. I carry it on the tractor at times in case I spook up any varmints.
Forum: Rimfire Area
https://www.midsouthshooterssupply.com/dept/ammunition/rimfire/22-short
I have that barrel and really like it in my 1911. I use 38 super mags and haven't had any trouble loading them.
They are tearing up the ground but are hard to sneak up on.
You could bring them up here, I'll help you get rid of them.
You are right at the max load but I don't think the pressure will increase that much. If I knew which ones were the magnum primers I would shoot one and see what it looked like.
I carry a 10mm compact from EAA for varmits. I get about 200 fps faster than the 40.
Forum: Our Town
I have 2 crossdraw holsters from Ross Leather for my SP101 and model 66 snubbies. They are made so you can draw while sitting.
I have one and it shoots well enough. The neck is really short on the round so I use a heavy taper crimp. Longshot gave the best performance for top loads. Unique worked well too.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |