Search:

Yup, have had one for about 50 years. The only problem I had was the sear notch wasn't sharrp, and the sear wouldn't catch the striker, hence full auto. Once I cured that, it's been a shooter. Sadly,...

Axe/hatchet

Ha, one step forward and two steps back. It just never ends.

I suffered with a headache for 8 years. It was in the back of the head for the most part. Over that time I saw 27 different health providers, numerous surgeries/injections, and pills. Nothing touched...

Received my order today. Great bargain.
Many thanks Will.

R.M.

Yes it is.

There's a lot of "Pucker Power" right there.

https://www.hodgdon.com/PDF/muzzleloading_manual_2008.pdf?CHECKBOX_1=on

I wouldn't bet on it.

Zinc is a 4 letter word.

I so Pledge.

Great news. I'm sure you are both so relieved.

Can you give us a link to the 6.8 mm head? Thanks.

You could try some Trailboss, if you can find it.

I believe this one is 7 mm
http://www.amazon.com/XCSOURCE-Waterproof-Microscope-Inspection-Borescope/dp/B009YSEUR8/ref=pd_bxgy_indust_text_z

I love mine. Cuts a nice clean hole in the target. I did have some feeding issues, but found that it didn't like the GI mag.
From my range scrap, the boolit drops at 175 gr.
Wish I'd have bought...

How many of us load for our spouses and kids? How is that different?

I use a carpenter's pencil on a hot mold.

My 98 Ram came with Wranglers. The lasted about 75K. I replaced them with the same and only got about 40k on the second set. I've since gone to Michelins from Costco, and they're doing great. They...

Probably not.

I find that if I cut the sprue too soon, it will tear a small divot. Cut it too late, and it will leave a hump. There's a fine line were it cuts properly.

Track of the Wolf, Dixie Gun Works, etc.

I'd say so.

You are measuring the bore diameter, not the groove diameter. You'll need to slug the barrel to get the groove dimension.

Check to see that the carb mounting bolt have come loose. While it's running, spray some WD40 around the base. If engine speed changes, you are sucking air. The gasket could be shot, or the carb...