2500 ingots
Type: Posts; User: fordfan
Forum: Casting Equipment
I built a bottom pour smelting pot out of a 20 pound propane tank it holds a lot of melted lead 129932
Forum: Lead and Lead Alloys
128012
I had a bad week. Thursday my father past away and to keep my mind sane I smelted all the lead I had in order to stay busy. Ended up with 1150 pounds 795 lbs of soft lead and 355 lbs of wheel...
Forum: Lead and Lead Alloys
.i buy range scrap for 50 cents a pound. I bought 400 lbs and smelted it in 3 hours. I got 271 lbs of lead and 83 lbs of copper and brass jackets. I sell the lead for $1.00 a pound and the scrap yard...
Forum: Lead and Lead Alloys
I did the same thing a few weeks back and the guy there told me it was brass and offered me $1.49 a pound
Forum: Lead and Lead Alloys
With this babbit how much pure would I have to add to bring it close to a coww consistency.
Forum: Lead and Lead Alloys
Thank you for all the info. I do have pure that I can cut it with which is what I'll will do because right now I'm casting with coww and it is working great
PS I also have a 5# slab of babbit...
Forum: Lead and Lead Alloys
My neighbors brother gave me 28# of this lead 92-6-2 and I know it will make awesome boolits. My question is should I leave as is or mix it with some pure to stretch it out? I'm casting for 45acp.
Forum: Lead and Lead Alloys
Last year some time a good buddy gave me a 5 pound bar of McMaster babbit and not knowing the make up of this stuff I just kept it laying around. Well finally I had my neighbors brother who works for...
Forum: Lead and Lead Alloys
It was 7.5 lbs for $40 and it was in gravel size stone pieces
Forum: Lead and Lead Alloys
I did last year and he said I could get 92%6%2%for $1.60 a pound
Forum: Lead and Lead Alloys
thanks guys that what I thought and thats why I turned it down. Even though it was some neat looking stuff.
Forum: Lead and Lead Alloys
I was given a chance to get some pure antimony from a neighbors brother who works at national lead foundry in Granite City. Is this something that can be used and what would it take to mix it with...
Forum: Lead and Lead Alloys
Thanks Guys for your help and info. I guess I'm on the look out for some antimony thanks again
Forum: Lead and Lead Alloys
I would be in for some too. PM me please
Forum: Lead and Lead Alloys
Thank You Hawkeye45 but what if I don't have any clip on wheel weights. Is just the tin enough?
Forum: Lead and Lead Alloys
My neighbor gave me a bunch of plumbers lead, flashing and pipe etc. My question is, will adding solder to it be enough for casting it into boolits for 45acp or will I need something more?
Forum: Lead and Lead Alloys
In old school body work what was the type of lead used? I'm working on a old truck and it has old lead work on it and was just curious.
Forum: Lead and Lead Alloys
In the last bucket I went through I found the tool for removing the wheel weights from the rim. Now to hit a few junk yards.
I was wondering if heating up a mold on the stove is a good or bad idea. I turned the stove on its lowest setting to where the flame is just barely on set the mold on the grate and it seemed to work....
Forum: Casting Equipment
http://www.midsouthshooterssupply.com/item.asp?sku=00036MTH1000
Forum: Casting Equipment
Well I guess its time for a new thermometer I did the cold water test and set the dial to 32 and when put in the boiling water it would not reach 212. And when adjusted to 212 would not go back down...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |