Thanks. These screen shots don't do it justice. Once I get it, I'll post better pics.
Type: Posts; User: AggiePharmD
Thanks. These screen shots don't do it justice. Once I get it, I'll post better pics.
Those are all nice pistols. I'm really stoked about mine. I've cast up some 148gr WC boolits from a MiHec mold I've had for ages. Plan to use some HP-38 since that's what I've got around.
Awaiting shipment of a J Post Custom PPC built on a S&W Model 10. Anybody out there have a PPC revolver from the 70s/80s?
Forum: Casting Equipment
Found what you are referring to on opposite corners of each block. Allen flat-head, counter sunk bolt so you can set up depending on your hand preference.
Thanks for the info.
Forum: Casting Equipment
I was casting with my 6-cavity MiHec mold today and noticed something. Are these set up to add the Lee sprue lever from Lee's 6-cavity molds? If so, I really feel dense that I'm just noticing...
Can anyone tell me anything about these. From what I can find these might have been made by Dan Wesson between '74 and '75 and roll stamped and sold by HS. I've always wanted a DW 357 but they have...
Forum: The Boolit Exchange
Thanks to all that have responded and sent samples.
Forum: Reloading Equipment
I've been contemplating a simple wire or fiberglass mesh and 1x2 contraption that would quickly attach and detach to your shooting lane via simple clamps that would either deflect or deflect and...
Forum: Completed Deals
This is the 4 die model right. No powder handling included with this press correct?
Forum: The Boolit Exchange
Does any one have some of the various Lee offerings below they'd be willing to let me buy please for testing?
I powder coat so either un-lubed or powder coated would be ideal?
Lee moulds:
...
Forum: Completed Deals
Does any one have some of the various Lee offerings below they'd be willing to let me buy please for testing?
I powder coat so either un-lubed or powder coated would be ideal?
Lee moulds:
...
Forum: Completed Deals
I'd like to purchase a qty of 50-100 of the NOE NLG boolit above for testing prior to purchasing a mold. Can be either sized, coated and ready to load or not.
TIA
Sounds like it is down the middle on case gauge vs plunk test. All good info on that.
I've always used a Lee FCD on my pistol rounds (all revolver rounds) with no issues. Is there something...
Yep not sure. I kinda went off half cocked so to speak. Decided on cast vs plated bullets before I thought about possible throat issues. Guess we will see.
So I'm finally gonna start reloading for 45ACP. First autoloader reloading attempt. I know this headspaces off the case mouth and thought I might better work with a case gauge at least for a bit. ...
Forum: Completed Deals
Figured I'd bump this up once before I pay full price for a new one. Please let me know if you have one.
TIA
Okay so I understand that you want the throats for a 41 caliber cylinder to normally be .4125 but does this preclude the use of .4115 boolit diameters? What happens if the boolit isn't sized to the...
Forum: Completed Deals
Howdy all. I'm in need of an unmodified Lee 0.410 sizer die (old type). If you have the push rod that's great. Please let me know if you have one. I'd prefer to use paypal or venmo to complete...
Forum: Completed Deals
Smoke it has been some time since I've used yiur powders. What temp setting and how long to bake do you recommend? Thanks. Gonna order some today. I prefer to call it Texas Aggie Maroon.
I bought a Pony Express model from Sun Welding Co out of southern cali. Awesome safe. Base starting guage on walls BUT you can upgrade it whatever you wish. Mine came in at 1100 pounds.
Treetop no transposition of digits. This was a natural caliber extension of an NOE GB of their 360-160 Type III WC off the original LYMAN 358432 wadcutter. NOE ran the 360 and then did one in 41,...
Thanks Gary for the info. I too have the same boolit in 358 and 412. Just cast the 41 and 45 today. Love it 358 to the point I can use this design solely for revolvers.
I cast up some of the 454432 NOE that weigh out at 268ish grains. I'm having a problem finding load data for this weight. Can I use 260gr data or 300gr data and what should I expect for speeds each...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |