try sage outdoors, they have them
Type: Posts; User: james nicholson
Forum: Boolit Lube !
I had a falling out with my Lyman 4500 and decided to try something different. I took a piece of White Label carnuba blue and melted it on my hotplate. Added about a tablespoon of STP and a little...
Forum: Our Town
I took it about 5 years ago. Instructor was retired DNR officer and competition shooter, very thorough instructor. We shot a lot of ammo up. Qualification was a 10 shot, 6 inch group at 15 yards,...
Forum: Cast Boolits
Lee data for a 158 grain starts at 6.2 and goes to 7.8 I have not tried this yet, so do not know how well it works.
Forum: Our Town
That's two of us Paul. And I like being me.
Forum: Hunting with CB's
You did well John, nothing better than organic bacon!
Forum: Hunting with CB's
Good job, and he learned patience is required to succeed.
Forum: Cast Boolits
Conners was 6 foot 7 inches tall, he was a former professional basketball player for the New York Knicks and also a baseball player, first base man, for the Chicago Cubs.
Forum: Shot Loads For Pistols
Don't try to use wad cutter cases, they are too long for a 38. Don't ask how I know that.
Forum: Cast Boolits
This very well could have come from a submachine gun, the SWAT guys use H&K 40 cal.
Forum: Cast Boolits
Did not know where to post this, so I started here. I pick up brass from the sheriff dept range and I found some strange brass. Head stamp is Speer, 40 S&W, but there are markings on the outside...
Forum: Smokeless Paper Patching
Well I did not have any luck, when ran through the sizer, it cuts at the lube grooves and the paper is now in 5 sections. But it may work with a Lee TL design or a smooth side design.
Forum: Smokeless Paper Patching
Before I try, I was wondering if anyone had tried Reynolds Wrap Waxed Paper? Seems it should work well to me.
Forum: Cast Boolits
My M-92 Rossi must be loaded with 38 spec cases with the Lee 358-200. I use 38-44 load data in mine.
I use 12.9 gr IMR 4227, recoil is less than full house 357 mag 158 gr.
Forum: Cast Boolits
Thanks for the test and your info #40Fan, at least you tested something instead of reading about something before making comments. You are on the right track, test it, record it, do it. In your...
Forum: Case Forming / Re-forming
I could be totally off base, but what about the brass .410 shells? I have never used them and have never measured them, but the rim should work, I think.
Forum: Single Shot Guns
Does anyone know the bore size of the 44 mag, I would assume std rifle size, and the twist rate? I have held, drooled over and fondled the .223 and am waiting to see the 44 mag.
Forum: Cast Boolits
Large rifle primers are taller than large pistol you should be able to sort them out.
Forum: Hunting with CB's
Problem is too many think they can buy that ability.
Man, that's a big 10-4
Forum: Cast Boolits
I tried the gas check in the lube groove trick that Larry brought up. He was spot on, I now can cast wad cutters for my worn 303 British. As usual Larry was on track and helpful. I now have a mold...
Forum: Coatings and Alternatives
Just ordered the Sage Outdoors 303 checks, thanks for the info and the link. Cold here today, first warmer day I will pc a handful of boolits and try these.
Forum: Coatings and Alternatives
I am using copper checks I bought on this site from Blammer. I am installing them with Lyman 4500 with a .315 sizer. On my checks they fit very tight. I lay the check down on bench, open side up...
Forum: Coatings and Alternatives
I am new to pc, have purchased powder and spray outfit, but not tried yet. On a cast Lee 312-185-2r gc for use in 303 Brit, do I install gc then powder coat or pc first then gc. My mold has been...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |