Thanks to some helpful folks here I have been able to obtain a number of .357 Maximum cartridges and an appropriately sized boolit. I have made a washer to fit over the rim and the cases feed and...
Type: Posts; User: doug strong
Forum: Single Shot Guns
Thanks to some helpful folks here I have been able to obtain a number of .357 Maximum cartridges and an appropriately sized boolit. I have made a washer to fit over the rim and the cases feed and...
Forum: Black Powder Cartridge
I shoot both SASS and NCOWS using genuine black in 44 special. 44WCF 44/40 is even betters or this because he thin neck seals the case mouth to the chamber better than straight wall cases such as my...
Forum: Single Shot Guns
These barrels are completely unmarked. They are certainly for the 73 model as there is the large gap for the huge heads.
I think mine is a 35-30 or 35-40
Forum: Single Shot Guns
On new years eve a buddy brought over his great grandfather's 1873 Maynard rifle. It has two barrels one for a shotgun and one for a rifle. He wants me to get him set up to shoot it. My first...
Forum: Leverguns
You are a lucky man. Grab some rounds and lets shoot it Sunday.
Forum: Our Town
I am in the same Medieval reenactment group though I am based out of Chicago.
I did the combat there for 25 years until I blew out my knee. Multiple times under the knife to fix it and my...
Forum: CB Loads / Military Rifles
Can anyone tell me the rough idea about each primer's characteristics? I know that small is small and large is large but what is the difference between rifle vs pistol and regular vs magnum.
Forum: CB Loads / Military Rifles
I just finished loading 500 rounds of 9mm with cast boolits. As I put things away I found I that I had used magnum primers. What would the effect be? am I screwed?
Forum: CB Loads / Military Rifles
2400 is new new favorite powder. About 15 grains seems to work well in everything I throw at it.
That is a really useful piece of info. I do not have a Krag (yet) but I am in the hunt for one
150 rounds loaded. no problems. Thanks for the help!
462. That seems to work. Thanks for the help guys.
I have been successfully reloading for the .303 British since last summer. Everything has been going well and a buddy of mine gave me a free set of Collet dies for neck sizing. I had hoped that this...
Forum: CB Loads / Military Rifles
I made mine out of a piece of scrap steel. It took about 15 minutes and I can shoot at 100 yards using a 6 o'clock hold all day long.
Forum: CB Loads / Military Rifles
I'll give 2400 a try. It has worked well in several other cartriges for me.
Forum: CB Loads / Military Rifles
I am in the market for a light plinking load for m38 carcano.
I need to find a mould and a load.
I like Lee Aluminum moulds because they are cheap.
I have the follwoing powders
IMR 4895
IMR...
Forum: CB Loads / Military Rifles
I am in the market for the same light plinking load for my Arisaka. I am using the Lee mould C312-185-1r with a gas check. I have the follwoing powders
IMR 4895
IMR 4064
2400
Bullseye
What would...
Forum: Cast Boolits
Spent Sunday at the range and I ran about 100 rounds through the pistol with incremental loads of 4.0, 4.2, 4.4, 4.6, 4.8 and 5.0.
The 4.0 shot best. Interestingly the group fell apart at about...
Forum: Cast Boolits
Back form the range. No leading to speak of and just as accurate. I Think for the next batch I will set up incremental loads of 4.0, 4.2, 4.4, 4.6, 4.8 and 5.0 and see what it likes. If I wind up...
Forum: Cast Boolits
I am going to do some loading right now. I will back the load down to 4 and I re lubed all my boolits last night so they should be dry and ready to use. Thanks.
Randyrat
I was worried that mine...
Forum: Cast Boolits
Thanks for the help. 452 is as cast.
I guess the simplest thing is to try more lube and give it another whirl.
I'll report back when I know more.
Forum: Cast Boolits
I am no expert at slugging barrels but I tried it and came up with .445 and .451 but who knows if I actually did it right.
Forum: Cast Boolits
My info may be hit and miss but here are as many answers as I can.
6 grains of Bullseye
.452 bullets
No idea of actual barrel diameter
Boolets are tumble lubed in a cool whip container with a...
Forum: Cast Boolits
I just got a Springfield 1911 today and took it to the range I ran about 200 rounds of Winchester bulk pack through it and it worked like a dream. However I really want to shoot Lead booolits out of...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |