324538
This is that same case that I cut in half. I tumbled it (probably way too long) and you can see some pitting. This was one of the worst cases with a ton of blue corrosion. I have no way of...
Type: Posts; User: Metroxfi
Forum: Cast Boolits
324538
This is that same case that I cut in half. I tumbled it (probably way too long) and you can see some pitting. This was one of the worst cases with a ton of blue corrosion. I have no way of...
Forum: Cast Boolits
324481
Got the last of them pulled last night and cut one of the the really bad ones in half. I have to say, it looked worse when I shined a flashlight in before I cut it. A lot of the blue...
Forum: Cast Boolits
That's not a terrible idea, I wouldn't be opposed to finding a mold and having some milder stuff for it. In the loaded rounds he gave me are some 8mm rem mag and 416 rem mag headstamped cases. I did...
Forum: Cast Boolits
The powder in the 1lb plastic container seemed fine but there was maybe 1/3lb left, not enough to be really useful. Thanks for the tip about vinegar, I'll give that a try. My plan was to pull them...
Forum: Cast Boolits
I recently got a rifle from an aging friend. It's a large wildcat he had built for an elk hunt that never happened but he kept the gun and loved it anyway. I got the rifle (minus the scope), custom...
Forum: Coatings and Alternatives
305547
Some "Gobstopper" inspired 00 Buck
Forum: Coatings and Alternatives
304292304293
My brother requested some zombie themed bullets for a 40sw. Tumbled in smoke's yellow green then sprinkled with a flame red that wouldn't tumble. He specifically requested "something...
Forum: BT Sniper
296721
Had a chance to mess around with a BTX and 40sw to 45 jacket expander. Full length 40sw cases, annealed, and some 40sw bullets from my reject bucket made a small handful of beautiful bullets....
This might be the place to ask...
I've been trying to find some reasonable and reliable load data for a double .690 round ball load. I have a .690 RB mold and some BP x12x wads on order. I also...
Forum: Swaging
I second NoZombies. I always save my "rejects" for plinking and prairie dogs it they shoot just as well as the others. Actually, a couple years ago we were shooting prairie dogs down in the...
Forum: Swaging
I believe the stingers are actually a steel case. Set a few on the work bench and wave a magnet next to them and they'll wiggle. I use 22 mag and cut down 17HMR for 243/6mm bullets just fine. I would...
Forum: Swaging
Corbins website mentions using cornstarch in a similar manner. Put a measure of cornstarch into a core seat die (no bleed hole) and it compresses to a plastic like material. I don't know how ashes...
Forum: Swaging
Easy, measure a small amount of ashes, pour them into the bottom of a jacket, then place a 1/3 weight jacket on top of the ashes and run into the core swage die. Think of the small core as a cork...
Forum: Swaging
I struggled hard when I first started swaging . I saved up and bought a .224 from 22lr set and thought it would all fall together. My first bullet stuck in the point form die and I was heartbroken. I...
Forum: Swaging
I learned early on that sorting by headstamp made things easier all around. My dies (and myself) do not like the federal cases. They take a lot more effort to draw out and I get the folds on the...
Forum: Special Projects
Not for my reloads, .358" diameter bullets chamber and shoot in my semi autos so that's all I've ever loaded them with. I only ran 18 rounds through it yesterday, there was some lube haze at the...
Forum: Special Projects
Thanks for the support everyone! I had considered other loads using light bullets and lighter charges, I could sure do that but this allows me to utilize a separate, unaltered cartridge. Having a big...
Forum: Special Projects
269608
These are two that I botched. The first one I had tried using an actual metal chisel but the angle was too abrupt and broke a finger. The second one I had cut too far down, when I was flaring...
Forum: Special Projects
I've been playing around with an idea of making my 6 shot GP100 in 357 mag a bit more versatile. One thing I wanted to do in particular was to get the cylinder rebated for moonclips. Pinnacle...
Forum: Completed Deals
I would prefer to keep it all together, I'm waiting for a response back from seabeeman before I make a call on splitting it. Thanks for the interest though!
I recently bought a Thompson Center Pro Hunter from Haus of Arms in Colorado and it bothered me enough to feel the need to post my experience.
I was actively looking for a 45 caliber rifle to...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |