With all the research I have done on the 38-55, I have never heard of or have seen one with such a large groove measurement. It is not uncommon to see a .381. My 336 slugs at .379. I agree with Chill...
Type: Posts; User: Red Cent
Forum: Black Powder Cartridge
With all the research I have done on the 38-55, I have never heard of or have seen one with such a large groove measurement. It is not uncommon to see a .381. My 336 slugs at .379. I agree with Chill...
Forum: Factory Rifles
https://www.sassnet.com/forums/index.php?/topic/281244-anybody-know-who-made-this-rifle/
Forum: Leverguns
"A throating reamer would have done nothing to alleviate a problem caused by brass being too thick at the mouth for a large bullet. Throating begins beyond the mouth of the case. I reiterate: Do a...
Forum: Leverguns
Texas by God,
For about two years I tried so many combinations of bullets, powder (including black) and the many ways to set up brass that my note book runeth over. Sized, not sized, full sized ,...
Forum: Leverguns
Well, the whole problem of lousy accuracy came from the owner "fixing" the problem with a throat reamer. Back when, Marlin made the throat so that a barrel that slugged .379-.381 could not be used...
Forum: Leverguns
I asked this question over on ASSRA and was convinced by Westerner that I should not renew my membership.
The 336 has been "fixed" by someone who thought you had to throat the chamber because .380s...
Forum: Black Powder Cartridge
https://www.midwayusa.com/product/1010391437/walters-wads-over-powder-wads-bag-of-1000
Forum: Gunsmithing Tips & Tricks
226207
http://www.assra.com/cgi-bin/yabb/YaBB.pl?num=1351821540/15
Barrel drilled and tapped and attached.
Forum: Black Powder Cartridge
Well, 3.5 of 4227, a caseful of Goex compressed about 3/8" was a dismal failure. And I mean dismal.
Interestingly enough, I reseated some bullets that were loaded very long. Put them down to the...
Forum: Black Powder Cartridge
There is a sweet spot. 2 1/2" @ 100 is rather bland. I want less than 2" consistently and I am willing to put some effort into the mix to achieve it. I want to surprise some people with an ol' lever...
Forum: Black Powder Cartridge
Ever had an epiphany? I am reading some statements from shooters and it occurs to me that the terms used is wrong and/or confusing. Past the term thing, it occurred to me that I am using a .380...
Forum: Single Shot Guns
The SSAMI chamber for the 38-55 sucks. Especially bad in a Marlin 336.
Forum: Leverguns
The Cowboy Shop is the home of the SHORT STROKE 1873
Developed By
Lone Dude and Cody Conagher
"Jot your serial number down because,
when you get your firearm back,
you'll swear it is a...
Forum: Black Powder Cartridge
This is an ongoing process that has been months in the making. Spent a lot of time on Marlinowners and learned a lot. Before and after that I did spend a lot of hours working on the Marlin. In...
Forum: Black Powder Cartridge
I have been researching duplex loads for medium range shooting. I have discussed the procedure with other shooters. I believe I understand what all is need except compression. Straight up question. ...
Forum: Reloading Equipment
Where would I get an expander to open the neck of a 38-55 case to a desired ID? Not just the mouth but the length of the neck. Don't need it that long. Just want to make sure I am communicating the...
Forum: Single Shot Guns
Fellas, I am entertaining the idea to build a rifle. While I am concerned about money, I want to know I am putting together a very accurate rifle. I want to build a 32-40. I will probably use a...
Forum: Gunsmithing Tips & Tricks
My South Bend Volume I manual says to use lard oil.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |