Does anyone have a drawing of the Lee C309-170-F?
I want to have a custom mold made that is .311" diameter and plain-base.
Type: Posts; User: Solothurn
Does anyone have a drawing of the Lee C309-170-F?
I want to have a custom mold made that is .311" diameter and plain-base.
Forum: Completed Deals
The GP100 front sight for the fixed sight version is the same as the Police Service Six.
Forum: Completed Deals
Lee .380 Roundball mold- 2-cavity with handles $35 SOLD
Lee .433 Roundball mold- 2-cavity with handles $35
Lee .445 Roundball mold- 2-cavity with handles $35 SOLD
Lee .358-148-WC 6-cavity. No...
I tried a Lee .54 380gr. REAL mold. The bullet in shot cup was a very snug fit through a modified choke.
But accuracy was terrible. At 30 yards, 9-inch group with most of them keyholing.
Forum: Reloading Equipment
I’ve adjusted crimp and seating depth, seated without crimping then running through .380 and .357 Magnum sizers with decaper removed. The best I’ve gotten was seating and crimping at .910” OAL, with...
Forum: Reloading Equipment
Loading Lee 356-95-RF, soft lead, powder coated, .357". CCI once-fired brass.
Size/flare/seat with Lee .380 3-die set.
OAL: 0.950"
Seating and crimping with Lee bullet seater die. The...
Forum: Cast Boolits
I special ordered a .313 sizer from Lee around 3 or 4 years ago. It actually sizes .3135. Wasn’t enough smaller than my .314 sized to work for my application.
Forum: Completed Deals
The GP100 front sight for fixed rear sight models is the same as the fixed sight -Six series.
Forum: Cast Boolits
Any suggestions for a .358 180-190 grain plain-base flat-nose mold that feeds well through Marlin lever-actions?
Around .25” meplat?
Forum: Cast Boolits
Does anyone have drawings of the .456” bullets that Kaido used to offer for the Ruger Old Army? I believe they were 200, 220, 240, and 255 gr.
Forum: Factory Rifles
I’m pretty sure the answer is no. However several custom barrel makers sell pre-fit barrels for the Ruger American.
Forum: Completed Deals
I've almost talked myself into ordering a 44-200 grain FWC Hans mold from Arsenal.
My Ruger Flattop is accurate with 9mm FMJ. I haven't shot lead 9mm through it yet.
My .357 cylinder has .358" throats and shoots great with lead. The 9mm is @ .355". Has anybody opened a 9mm...
Forum: Rimfire Area
Out of three 452's and 1 455, I can't tell any difference in accuracy. The fit and finish of my 455 Lux is just a little better than any of my 452's.
Forum: Our Town
Thank you. We just took a bee keeping class from our local association, and are planning to get our first bees next year.
This system sounds like it will be a big step forward in pest control.
Forum: Cast Boolits
I've only been casting a Lil over a year and a half. I read a lot on this forum before I got started and learned a lot from it. Here's a few little things I learned or found to be helpful after...
Forum: Gunsmithing Tips & Tricks
I want to install a rugged front sight on a Ruger American Predator, which has a 5/8"-24 threaded muzzle.
214692
This is the front sight of a Tikka T3x Arctic, which looks to be what I want.
...
Forum: Hunting with CB's
It's a Howa 1500 heavy barrel with collapsible stock. I don't know the model name.
Forum: Hunting with CB's
A buddie's daughter didn't care for the recoil of his Howa .308 with factory ammo. She didn't mind my cast/powder coat load, 26.5gr. H4895, at around 1700fps.
Hunting in Cleburne county, she shot...
Forum: Coatings and Alternatives
165gr. +/- 0.5gr. Measuring bullets with digital calipers, all cavities were the same.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |