Search:

Mine shoots ok. Nothing but lead through it and have had no problems. But I still like my 1911s better.

I shoot lead bullets with a harvester crushed ribbed sabot out of 2 cva accuras. I have used 44 and 45 caliber boolits and they all shoot good. I use 90 grains of blackhorn powder. Cva makes a...

I didnt have any primers fall out of wichester brass on 350 legend when shooting. But when i went to reload them, had some of the primers fall out after i seated them. Once fired brass. They showed...

https://stevesgunz.com/

tps://noebulletmolds.com/site/product-category/355-9mm/358-128-rn-bn5 I like this mold, it shoots good in my 9mm.

Hornady 10th edition. 240 grain xtp mag. win 296 starting load 29.2 max 38.8. h110 starting load 30.6 max 40.6. I use the 250 grain ftx in a bushmaster upper 20 inch barrel, with 33 grains of lil...

I have a Bushmaster 450 bushmaster upper with a 20 inch barrel. Put it on a rock river arms lower. The hornady 250 gr ftx ammo is real accurate. I just buy the 250 ftx bullets and load with Lil Gun...

I have shot the lee 300 in mine using unique. They shot good.

cva made an optima pistol with a 14 inch barrel. I picked one up last year and it shoots good. Shot a doe in the late season at about 100 yards. Boolit hit were i was aiming and she didn't go far....

I will take the 380 brass.

i have a 12 inch Bullberry barrel. I shoot the rcbs 200 and the ranch dog 190. I use 1680 for powder, it seemed to shoot better than 296. i have had a 2x6 scope on it and it shoots very good. I use a...

My liberty safe was made in 2005, and the key number is SGR615.

My glock 40 slugged out out a little over .400. Shooting boolits sized at .402, wont shoot a group less than 3 inches, with a rest and a red dot. Got to looking at the brass it measures .432 at the...

check noe website they may have a plain base in stock. And there is the 20% off year end sale!

I have used blue dot for over 20 years now with the 9mm, and have had very good luck with it. From 90 grain bullets and boolits up to 147 grainers.

Might be a crimp problem. I have 6 9mms, I size 357 or 358. Crimp enough to get rid of the flare, and they all work. How are you sizing the bullets?

I shoot the same loads in mine that I do my 1911's. Lee 200gr Noe 200gr and a Mihec 200gr penta hp. I use red dot for powder, seat to fit barrel.

Tomme ive had mine for about a year and have had no trouble with it. Mostly 115 and 124 gr. jacketed with blue dot or aa7. Been powder coating the lee 120 gr lee 102 rn and rcbs 90 gr. rn on top of...

I use this boolit in flat nose instead of hollow point, with 20 grs of 296. It works well in all my 44's. My buddy and I have killed several deer with this combo from 20yds to 100yds. All were pass...

Just bought a mold from Excess650. Great guy to deal with, good communication. Thank You

Some like 2400 never tried it in 44 myself. Unique or 296 are my go to powders for 44. With any weight boolit.

I would like to get a 3 cavity 434 PB.

I have the Taurus 8 3/8. I shoot the lee 400gr, it shoots good with 20 grs of 296. Tryed 20.5 and 21 grs of 296, didn't seem to be as accurate, so just went back to 20 grs. I didn't have much luck...

Check out brownells tech notes. There is some on there about 19911 triggers. I have done the triggers on all of my 1911 and its not that hard. I like the Ed Brown parts if your going to get some...

I have a 629 no dash, i've had for 20 or so years. Shot lots of 240gr swc with 7- 7.5 grs of unique. They shot really well. About 21.5-22 grs of 296 behind hornady 240 gr xtp shot well too. Couldn't...