You got it buddy. Prayers sent.
Bill
Type: Posts; User: wickerbill
Forum: Our Town
Ya, the same thing has happened to me the last two times I ordered lead. It came in and I got a notice in my mail box that my package was not deliverable and I needed to come to the post office and...
Forum: Cast Boolits
Here's a tip to help the chore boy work even better. Mop the barrel with Krol first. It will help float the lead and the chore boy works even faster.:drinks:
Bill
Forum: Cookin' Recipe's
I tried this tonight and MAN IT'S GOOD.
Bill
Forum: Cast Boolits
CajanRebel, I've been using a Hock mold for about 10 years now. There are a few tricks to getting a consistent pore. First and foremost is a higher than normal temp on both the alloy and the mold....
Forum: Cast Boolits
You ought to try it with a custom 5" barreled 30 carbine BH, now that's loud.[smilie=w:
Bill
Forum: Cast Boolits
Well, compared to my 454 loads(300gr LGC at 1600) that seems kinf of pleasent to me.
Bill
Forum: Cookin' Recipe's
It's the acids in all three ingredients that braks down the meat in this case. Sounds good to me.
Bill
Forum: Cookin' Recipe's
Took the left over beans and made a big pot of chili(sorry, I;m not in Texas so I use beans) and man it was good.
Bill
Forum: Cookin' Recipe's
Didn't use ham, but my wife fixed pintos tonight with a whole slab of sliced salt pork(smoked), onion and a little garlic. Fixed a big skilet of cornbread to go with it.(The cornbread was cooked in...
Forum: Cookin' Recipe's
YUM! Fixed this last night and eat it today. This is one good dish.
Bill
Forum: Cast Boolits
All of my handgun rounds and auto rifles are loaded on a modifided Dillon AT500. It has all of the 550B upgrades but the auto powder measure. I don't like the Dillon powder measure. I use the...
Forum: Cast Boolits
I use a WD-40 soaked shop rag and a tooth pick.
Bill
Helpful hint, if you have lube on the nose of your loaded rounds and you want to take it off. Spray a rag with WD-40 and wipe it off. ...
Forum: Single Shot Guns
An 18 twist is for heavy boolits only. 500 grs. or better. If you want to shoot 300, 400 and 500 graines from the same barrel. Just remeber, a 20 twist is a compromise. The 400's will most likely...
Forum: Reloading Equipment
What can you say. Pot metal brakes, but I have always had good luck getting parts from Lee. Whatever you do, weather it be a progressive or a turret, fix that lee and hang on to it. I have a...
Forum: Hunting with CB's
74 Sharps
Cartridge: 45-70
Boolit: 525 Gr. Hock nose pore
Alloy and treatment: 20 to 1:none
lube: SPG
Powder: 1.5 Swiss BP
Powder charge weight: 67.5 Gr
BOOLIT Velocity: not known
Game...
Forum: Cast Boolits
Hey Jim
YOu don't have to go to Brownell. Just go to Wal-mart and get something called Brite Boys. It's the samething. Get the stainless, not the copper. I've been using it for years. Your...
Forum: Classics & Stickies
Hey Jim
YOu don't have to go to Brownell. Just go to Wal-mart and get something called Brite Boys. It's the samething. Get the stainless, not the copper. I've been using it for years. Your...
Forum: Cast Boolits
Got started reloading in 78 and not long after that, the man that own the range where I shot got me started casting bullets. He was a retired Navy cheif, that spent twenty+ years on the navy skeet...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |