Search:

Thank you very much for the info. I´ll try to cast them from range scrap and see if they get to about 200 gr.

I´ve just got my hands on a Lyman 452374 Hollow Point mould and have already casted some nice boolits, they came out weighing at 186-188 grains from straight WW.
Due to the lack of information for...

Your problem has to do with the feeding angle of Glock pistols and mags.
I couldn't get shouldered bullets to feed in either my G21 nor my G30 with OEM or aftermarket bbl's.
I changed bullet...

I agree with everyone that a SWC as the H&G68 wil make you very happy with your Kimber, and I think you should buy (ask Santa) for it. But being a Glock owner myself I would recommend that for your...

I crimp both the TC and the RN to .472"- .4725. No setbacks whatsoever. My OAL for the RN is 1.250 and the TC I set it up just about where the base of the cone is or in other words, where the taper...

Most SWC's and Glock's don't get along fine, as I had to learn the hard way. I would recommend to you to try someone elses boolits in different profiles to learn if there is one that will feed...

Thank you very much Maven

Thank you all for your replies.It's courious you mentioned Super Moly,I've just finished the last of the 20 sticks that came with my lubsizer (bought it from a friend that never finally got into...

I´ve read the sticky on lubs and it shows lots and lots of recipies, but some are for dipping or pan lubing. Could anyone help me by indicating which ones I can use through a Lyman 4500 lubesizer?

There are 16 ounces to a pound. Redo your math.

Yes, Specially in the RN bullet. In the TC bullet, if I seat it at 1.180 the bullet t chambers all right, but I am concerned with pressure.

Yes, Specially in the RN bullet. In the TC bullet, if I seat it at 1.180 the bullet t chambers all right, but I am concerned with pressure.

Good day to you all. I would really appreciate your help with these bullets. No logic with OAL, they always touch the lands of my Lone Wolf Barrel and don´t allow the gun go into full battery. I even...

It´s for 45 ACP.

I would very much appreciate it if yuo guys could help me with a load for this bullet and powder. I´ve used the search tool but it is very confusing for I´ve seen charges ranging from 4.9 to 5.7 gr....

Yes. I´ts for 45 ACP.

Thank you John Boy. So can I use LRNFP OAL for TC Bullets?

I´ve just made 1500 perfectly good boolits out of this mold and will be loading them up soon. But it has been difficult to find data on OAL for this boolit. Anyone who uses it that could help me...

Thank you all. And yes, I´m using it for IPSC.

Thank you James

Does 3.9 gr. of W231 and 1.160" sound all right to you?

Using Lee 356-124-2R, Win SP, 4.0 gr. W 231, Mixed brass1.10" OAL, but I cant get them over 960 fps average, thus I cant make it in to MINOR. Any suggestions? Thanks.
__________________

I´m trying yo load some boolits from Lee Mold 365-125-2R but I have confusing data in respecto to OAL. Lee reloading manual states a min OAL for a 125 gr. Lead Bullet as 1.100"- 1.115". Lyman 48th on...

What I can see is that yes it is not a TC boolit, it´s a semi-wadcutter and when the gun is cycling to its rearward position, the spent brass somehow strikes the base of the semi wadcutter boolit...

Thank you very much. I´ll try that.