I feed 44.5 grains of Reloader 7 under a 400 grain Speer Jacketed bullet to break in a badger barrel in .45/70 and it was a great combo. Chrony was 9 feet from muzzle, 98 degree day and it averaged...
Type: Posts; User: Sniper Chief
I feed 44.5 grains of Reloader 7 under a 400 grain Speer Jacketed bullet to break in a badger barrel in .45/70 and it was a great combo. Chrony was 9 feet from muzzle, 98 degree day and it averaged...
Found the following information on the web - don't remember where, probably right here.
Chief
UNIQUE POWDER AND THE .45/70
I tried some Unique in my 45-70 Cowboy and was pleasantly...
Stephen - Sir - I have been shooting a .300 grain Keith type boolit from a Lee mold in a Ruger .45 Blackhawk (had the gun 25 years) with a 4 5/8" barrel loading 22 Grains of WW-296 (same as H-110) -...
I have never had the opportunity to shoot the .458 Mag. but I have shot lots of IMR-3031 in a .45-70 at the mid 30's to low 40's (35 - 40 grains) pushing both the .430 grain Ranchdog mold boolit...
I like IMR-3031 in almost any of my .45-70 loads that I build for a Remington R.B. # 5 because the manuals seem to indicate this powder produces overall the LEAST amount of CUP pressure. Largest...
My son-in-law and I shoot a Llama .380 (1911 Frame style) and a Bersa .380 both with a semi-wad cutter Lee mold that is supposed to cast a 105 grain, but in actuality cast more like a 100 grain of...
You might want to look at some different powers. I am sure you know that the large bullet is from where most of your recoil originates. A lighter bullet or different powder. For a plinking load...
Forum: Single Shot Guns
Gentlemen, I am looking for a mold that will cast .460 in a light weight (250 - 300) or even lighter. I want something for plinking and "vermin" shooting. Lots of coyotes in my neck of the woods.
...
Forum: Single Shot Guns
I want to continue this discussion by saying that I appreciate beyond measure the thoughtful and helpful information and questions you guys are providing - WOW. I just received my gun back from the...
Forum: Single Shot Guns
Mr. Marlinman93 - Yes Sir, Mr. Stallman at Badger Barrels cut this one at 1 - 16 twist. I do not remember suggesting to him that it be this fast, but I would rather have a problem of spinning a slug...
Forum: Single Shot Guns
Mr. jh45gun: Thank you so very much for this help. I have no intentions of pushing my .45/70 hard, but just wondering about the ability to SAFELY reduce the arch. I found Mr. Garbe's web site and...
Forum: Single Shot Guns
Mr. jh45gun - thank you very much for the information. When I get a little more time I want to ask a few more questions, specifically about your loads you are using. Would love to have more...
Forum: Single Shot Guns
Mr. John Boy - Sir, sometimes it seems I might be a little slow to pick up on things - I have the Lyman Cast Bullet Handbook, Third Edition, by C. Kenneth Ramage, Editor. This is NOT the publication...
Forum: Single Shot Guns
A couple of years back, I traded for a Remington Rolling Block receiver, which I believe to be a No. 5 receiver. When I received it, there was a 6" piece of the barrel still attached (the chamber...
Gentlemen HELP Please. I am shooting a .45-70, .45 Colt, .38/.357 Mag cast reloads in several different boolit weights. I have found sitting in a gun shop, two 4 lb cans of WW-AA - Lite shotgun...
I am loading 38.5 grains of Benchmark with Large Rifle primers and the LEE mold number 90577 which is: 459-500-3R or a spire pointed boolit that comes out + or - 3 grains at 490 grains with wheel...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |