Hi Bill,
I have been using a lee push through die and alox tumble lube in the past, also tried pan lube but it is a messy pain in the neck.
I just wanted to give a lube sizer a try, which of the 2,...
Type: Posts; User: twally
Forum: Casting Equipment
Hi Bill,
I have been using a lee push through die and alox tumble lube in the past, also tried pan lube but it is a messy pain in the neck.
I just wanted to give a lube sizer a try, which of the 2,...
Forum: Casting Equipment
Horace, I will be sizing .357 mag and .40 s&w. and someday mess with rifle boolits.
Forum: Boolit Lube !
I just made a batch of that too, it was my first pan lube i have ever tried.
It seems to be just a little soft, how can i make it just a little harder?
Forum: Boolit Lube !
I made my first batch of pan lube.
1lb. bees wax
1lb. vasoline
1lb. of parafin wax
1tbs. stp
The lube seems to be a tad soft when cutting from the cake, does anyone have a suggestion what to...
Forum: Casting Equipment
I want to buy a lube sizer but really dont know the first thing about the machines, just wanted to get some suggestions before I bought something and was disappointed not knowing all the ins and outs.
Forum: Lead and Lead Alloys
geargnasher, I'm not having any luck searching the topics you suggested.
I do not use a fcd but I do use a dillon taper crimp die, do you think my crimp is too tight causing my bullet to be...
Forum: Lead and Lead Alloys
I am using alox but a regular lube groove , but also using commercial cast and still getting lead, only pushing about 850fps. 3.3 gr clays
Forum: Lead and Lead Alloys
Will going to a gas checked boolit stop my leading in the barrel problem? or is there more to it than just adding a gas check?
I'm loading .40 s&w pistol rounds.
Forum: Casting Equipment
Does anyone know how to get the muffin ingots out of pan without sticking?
one of my old pans works great, but the last two new pans I ruined trying to get lead out.
Forum: Lead and Lead Alloys
http://castboolits.gunloads.com/imagehosting/thum_88794f3d12d0db23a.jpg
Forum: Cast Boolits
can any body think of any posts that refer to slugging the bore? I can't find anything in the search .
any videos?
Thank's Wally
Forum: Leverguns
Hello everyone,
I just wanted to report back to you all about the m92 .357.
The dealer took the gun to the range and test fired with several brands and hand loaded ammo and had the same results...
Forum: Leverguns
Thank you all for the great help and advise, I took the rifle back to the dealer today to let them decide what they want to do.
After all this is a brand new rifle and should function without having...
Forum: Leverguns
ok, my round sits on the elevator just like the picture, but when i push the bolt forward it stays at that angle the rear of the shell stays down and then binds up .
Forum: Leverguns
That's a good question,
I am using commercial loads that measure 1.57" oal. 3 different brands, and 3 bullet weights and types.
125gr. jsp Remmington
142gr. fmj tc Fiocchi
158gr. jhp ...
Forum: Leverguns
I have tried to go fast and slow, but it still binds and jams. I tried a little force but that just wants to push the round down not up into the chamber, the round is sitting at the same angle when...
Forum: Leverguns
ok thank you for the info.
I cleaned the thing out good and lubed again , still the same thing just wont feed .357 feeds 38 special great, after it jams if i push the leaver forward and then try...
Forum: Leverguns
ok 357 I'll try cleaning.
Looks like you have a 92, how does yours work? any problems or have you done any mods. to it? also if I get it running I need to get a mold to start casting.
thans...
Forum: Leverguns
.357 shooter ill be honest , no i didn't clean it at all it is new so I thought it should clean.
Forum: Leverguns
yes it gos in ok it is getting hung up before it reaches the chamber. almost like it is too steep of an angle. it looks like it hits the top of the cartridge on the top of the chamber.
Forum: Leverguns
I just took my new Rossi 92 out of the box and headed to my back yard to shoot it and was very disappointed when it would not chamber any .357 ammo that I had , I tried 3 types and would not chamber...
Forum: Cast Boolits
I have shot commercial lead and my own cast straight w/w for several hundred rounds without any problems.
Now, all the sudden i'm getting a lot of leading, like the groves are full at the muzzle....
Forum: Lead and Lead Alloys
I have found a pile of old vent pipe lead sheating at a roofers shop, what type of lead is this and what can it be used for in boolit casting?
Thanks Wally
Forum: Boolit Lube !
Rob,
I am casting 182gr. .40 s&w sized to .401 air cooled ww's shooting at aprox. 800 fps. I have not sluged my bore, but I have used commercial cast sized to .401 in the past with no problems.
...
Forum: Boolit Lube !
Is there any reason to get leading when using straight ww's? I lubed with LLA/jpw
Maybe not enough lube? I went very light with the LLA per all of the advise "a little will go a long way" any...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |