Search:

Best part of it is my NEF .357 MAX gives comparable results with that boolit...... great design job Ranch Dog.

I tried Ranch Dog's 359-190 in my Marlin 336 (micro-groove) and this is what I got for the first load tried at 100 yds.

http://i97.photobucket.com/albums/l237/Rkring1/HPIM1366.jpg

I really...

I have tried that boolit also and didn't have any luck with it, the barrel is the wrong twist for it I believe.

Mine seems to like Lyman 429215 cast from 3 parts wheelweight : 2 parts lead, lubed with BAC and sized .432 over a stout charge of IMR4227. Most all of these have large bores and will need to be...

Avoid wire nuts unless you can find some of the old ceramic ones......... the plastic ones melt.... don't ask ! I used the crimps that are normally used for submersible pumps...the second time around.

Saw that one Bret. I don't have enough space for it and also no way to move it if I did.... gonna have to live with the old Craftsman.... took 4 of us to get that in the shop years ago when I could...

I had both, sold the T-Mag......... I am very happy with the Classic Cast Turret press. I did keep my Rockchucker for single stage operations but I'll be darned if I know why, the Classic seems to do...

I'll second looseprojectile's opinion.. that is one heck of a good bullet.

I am not so sure about their warranty not applying either, my vibrator tumbler broke last year and I called them, real nice gal, she said send it in and we will replace it with the standard size. I...

Most Harbor Freight stuff is junk, made by slave labor in Red China or the like..... I try to avoid buying their stuff. RCBS vibrators work well and with their superb warranty and service you will...

Blammer, have you tried a search at GBO's NEF site ?? http://www.go2gbo.com/forums/index.php?board=126.0 Seems to be quite a bit of info there.

Well now, that was just good reading ! I'd like to sit on the porch and swap lie....'er stories with you for an hour or two :drinks:

Keep your eye out for a die mount tapped 7/8-14 , they sometimes show up on eBay..... or have a machine shop bore and tap yours so it will use standard dies. They are a neat little press but having...

I bought one of the Lee 458-340 moulds from Midway shortly after Christmas, it came in with the nose of both cavities in pathetically rough condition, looked like the cutter caught a chip or...

I have tried it numerous ways and currently I thin it about 50/50 with mineral spirits, fill a small container to the level of the lube grooves and dunk the boolits, then set them on a plexiglass...

Have a look http://www.midwayusa.com/browse/BrowseProducts.aspx?pageNum=1&tabId=1&categoryId=19930&categoryString=9315***731***701***19640*** I bought the large Lyman and cut it in half to do two...

PayPal is good for something !!! :):) I'm in, best of luck with this Gray Wolf, hope we can raise enough to get you fixed up.

I've had good results with H110 and strangely enough Reloader7...... the RL7 load is slow and dirty but accurate. Many of the 357 MAX shooters I've talked with prefer AA1680 but I haven't gotten...

be sure to mention that it is 'Vintage", not old..........

I believe the one I used was the cone throat, you might try calling 4D and ask what they have, the word is they are very helpful. Regardless of which throat , mine shoots very well, but ,yes, I do...

Going from 357 mag to 357 max is really simple, takes probably 15 minutes...... reamers can be had from 4D rental http://www.4-dproducts.com/ for about $30 + return shipping . You simply remove your...

I bought a 2 cavity from Midway a couple of months ago, cavitys were nasty, I called them and they sent a replacement right out. .. darn good service as far as I am concerned. The replacement was...

Lee has some videos available http://leeprecision.com/html/HelpVideos/video.html that may help you.........

Do the fired primers appear to have a normal dent from the firing pin or are they shallow ? If they are shallow you have either a headspace problem, chips/dirt in the firing pin limiting the travel,...

Send it back, it doesn't matter if it only cost $10, you paid for a new , usable piece of equipment and you got junk. Midsouth is a good reputable company and will surely take it back and bill the...