Fill rate was towards the upper end of the data I have. Even then it was still dirty.
How ever their was very little flash with it. Also the recoil impulse seemed less then with 296 or h110.
Type: Posts; User: Royalwolf
Fill rate was towards the upper end of the data I have. Even then it was still dirty.
How ever their was very little flash with it. Also the recoil impulse seemed less then with 296 or h110.
I shot some 11fs loads today.
They did well they seemed similar to 296 but were very dirty.
Anyone else have similar results?
How many have tried 11fs.
I found it to be very similar to 296.
It seems to burn very dirty.
Also I got good velocity out of it with similar speeds to what I got out of 296.
Also is any one...
Forum: Cast Boolits
Thanks for all of the quick replies.
This helps alot.
One question. On the accurtate mold catalog it shows max nose length for a glock.
Is it that big of an issue.
Forum: Cast Boolits
Does any one have expearence with 10 mm auto.
Which mold and your prefered boolit weight.
I am shooting a 1911 and a glock with a after market barrel.
This will be my first 10mm mold.
I will...
Forum: Cast Boolits
So if you could have only one boolit mold what would it be and why.
This is not a cartridge specific question.
For me a oversized 255 keith would cover 45 acp auto rim and 45 colt maybe even a lite...
Forum: Cast Boolits
So after a lot time spent shooting and casting I found a match thanks to the folks at accurate molds.
The 45-250-P checked all of the right boxes for me.
It seals the chambers on my 1873 with no...
Forum: Cast Boolits
Up date.
So I found some 250 grain rnfp Missouri boolits.
They shot great out of the 1873 and I did not get any blow back. The cases were still smoked but much better results.
If it matters I used...
Forum: Cast Boolits
What about some thing with a gas check. Any thoughts
Forum: Cast Boolits
Please provide suggestions on which mold to cast with.
I keep buying molds but find limits as I switch to different 45 colt"s.
I all ready have the 255 Keith mold and the 270 rcbs mold which I...
Forum: Cast Boolits
So out of my bfr I got 1370fps with 26.5 grains of 11fs.
I called western powder and spoke to Rob and he suggested I try it.
What I liked most was how clean it burns.
All of my cases were very...
Forum: Cast Boolits
So I got a pound of the new 11 fs powder from accurate. In my BFR I got good accuracy with cast performance 410 grain boolits.
I was very impressed by the low extreme spread and standard deviation!...
Forum: Lead and Lead Alloys
Thanks for the info. The bars did not look like they had been re cast. Along with havinging a brite sheen to the lead. It almost looked like it had some tin in it.
Forum: Lead and Lead Alloys
Ok looking to melt some lead for 45 acp and long colt.
I found some solid bars of lead they seem to be a foot long 4inchs wide and two inches thick. Would any of you know what kind of lead it might...
Just picked one up.
I ran 500 rounds of colt and a lot of 45 acp. Accuracy has been fair not terrific. The 45 acp with 200 swc has been great and the 45 acp loads are very comfortable to shoot. I AM...
Looking for some pet loads for 255 swc keiths.
I have been using some loads from taffin but she still isn't grouping as tights as I would like.
Any suggestions on redhawks.
Also I am looking for...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |