Search:

I'm using Lino and Bullets are actually dropping at 237 with coating and all. I also have a Lyman m 31 die that I may try. My only concern is that with the 31 will it open the necks up past .334 and...

I have the plain base mold. I wasn't aware that I shouldn't crimp. I will try that tomorrow and report back. No keyholes at 100 will shoot a little further tomorrow as well

So in trying to use the Noe 247 mold in my 16 inch 1/8 twist 300 blackout. Bullets feed and fire reliably and stay subsonic right at 1050fps and will stack like cord wood out to 30 yards or so. After...

sal pal i will give them a ring in the morning thank you

jmorris the flippin them into trays really didnt work to well lol and i am using the same foam trays like from midway but i buy them direct from the source. i am using one type of tray for .380 and...

thanks jmorris i will have to give that a try and see if it works

thank you very much

i am searching google for the ammo fork but i cant seem to find anything about one or a pic of one.

i have recently gotten my ammo loading company up and running and am running about 12k rounds per day and am looking for a machine that i can use to make loading the foam trays a lot faster and...

got ya

when you say your processing the brass in the video are you just sizing and depriming or what?

that is too awesome that dillon is running as fast as a dam camdex lol

thanks for the comments guys pm responded to rock and pm sent jmorris

like the title states does anyone have any exp with using an autodrive on a dillion press? i have been lusting over one here as of late and am wondering how finicky they are? wondering how hard it is...

anyone?

i have an ancient ballisticast machine with a estimated 60 pound pot on top of it. i have drained the pot down and cleaned it the best i could to try and stop a leak in the valves to no avail. i have...

all four of these guns will cycle fine using the lil gun and h110 when using fmj bullets just not the cast bullets

when trying the h110 and lil gun powders the load was tested in 4 different rifles. it would not cycle any of them. two of the rifles had a pistol length gas system as well. all 4 rifles cycled with...

^^^^that didnt work in mine i tried it up to 14 grs before i saw case pressure and still wouldnt cycle and was hitting 1450 fps

good deal doc thanks for your response i have been talking to accurate by way of email about some other molds and saw where they made them for the magma caster but wasnt sure of the ballisticaster....

i have a ballisticast autocaster and am wondering if any of the mold makers here offered molds for the machines. i talked to ballistcast the other day and they do not currently have the mold i am...

i got mine shooting and cycling great with reloader 7. bullets were cycling at 950 fps. i stopped with 1050 fps with 10.2 grains and bolt locks back on last shot. im using a spikes tactical with...

well i sent ballisticast a private message and havent heard anything yet. i guess i will try and call them tomorrow and see fi i can get it ironed out.

i was able to get my gun running without hiccups with 10.2 grains of reloader 7. they were mostly running at 1050 fps but had ranges of up to 60 fps under and 30 fps faster. all bullets made perfect...

run five i havent been able to locate any 1680 or rl 7 but i have seen where a few folks are saying 5744 was working for them. i have sourced some of it and should be able to pick it up tomorrow....