Search:

Go to Hitchcock Shoes ,You should be able to find what you need. wideshoes.com

Try to find the Lyman 311414 mold for the 300 savage. Gas check and size to .309
or what ever your rifle likes and your in business. Fits the tight fit of the K-31 chamber
well.

Ramps are hard to find in New England. But I did manage to find a few in Madison
CT a few years ago. I dug up a bunch and saved as much roots/dirt and planted
them in RI. Shady damp area, but they...

Hi Nit Wit: If you have the broken spring, Give Jack First a call. They can make you
a new one. But call first to be sure. I don,t have their phone number, but you can
google it.
Ducky/webfoot10

If your giving these away I can use them. Send a PM with your address so I can
send you postage. webfoot10

Find some jewel weed and mash it up and put the green slime from the stem on the
poison ivy. It should clear it up fast. I was at a vou a few years ago and they had mowed the fields
for the...

Check out Jack First. They can help you out.

Heat the frizzen to a bright yellow as redhot is not hot enought.
Then take the hot frizzen and drop into a can of powdered bone
meal, be sure to completely cover the frizzen. The hot frizzen ...

I have a bag of plastic powder tubes for muzzleloading measured charges
for use in pockets or shooting bag. Will hold both bullet and powder charge.
I have 20 assorted tubes. FREE. shipped.

I could use the 7 mm dies. Would be glad to pay the shipping.

Google TentSmiths in North Conway N.H. They make all kinds of tents.

In a older Lyman reloading manual I found these loads for some of the rounds you
load for.
38 special 5.5 grs Herco for all bullet wts.
357 mag 7.0 grs for all bullet wts. Except 195 gr which is...

Take off reciever cover, spray with brak-kleen till carbon and dirt is gone then blow
out with low pressure air hose. Replace cover. Done.

Hi farmbif, My neighbor passed away and left his daughter his 2012 Chevrolet Silverado
crewcab pickup, It's a 4x4 with 90000 miles on it with tow package. Not sure what that
includes, It's just...

Miles Stair's Wick Shop. Should have what you need. Google will take you to his site.

The old Lyman 311414 bullet for the 300 savage is the bullet you want for the
k-31 swiss. Gas checked and sized at .309 it will chamber with ease. I think
NOE makes a copy of the 311414. Give it a...

Just empty the lint from your dryer, works just as well as dacron and you
have a never ending supply. Cost is nothing, talk about cheep.

STP oil additive, just put a little on a felt pad and rub it in, then roll your case
on the pad and size. Just takes a light coating, wipe off case with dry rag.
If your really cheep STP is the way...

I use the rcbs berdan decapper to decap berdan cases. Once adjusted works just about
as fast as decaping boxer cases with my press. Only ones I've had trouble with are the
french lebel cases with...

Honda 7.5 if they still make them. Mine is over 20 years old and still runs well.
I use mine in both salt and fresh water. But I always flush in fresh water after
every use.

Smear a litte beeswax/tallow or lard mixed together on the cap to keep out any moisture,
After coating the cap, just wipe off any grease off the top of cap for a sure fire.

Walmarts, Window and door weather striping. 25 ft roll, $1.25 works well. 1/2 in
wide , just cut off little squares and press into cylinder. Don't know what it's made
of, but it don't smoulder...

I shoot a lot of surplus ammunition in my military rifles. After firing I spray windex
glass cleaner down the bore from the breech end to clean out the salts and wipe
with a dry patch, Then a...

Ben's Liquid Lube is what you have made. Read all about it in the stickys above
don't have to reinvent the formula. All the work is done for you.

I use aa2520 in my 30/30 cast loads. 26 grs under the noe 313/150 cast bullet gaschecked
sized .311. with a pinch of darcon filler. 1,800 fps. and very accurate in my 340 Savage.