It is now cataloged as a 360-313-FN
https://noebulletmolds.com/site/shop/bullet-moulds/358/360-313-fn-ax2/360-310-fn-2-cavity-pb-thumper/
Type: Posts; User: BK7saum
It is now cataloged as a 360-313-FN
https://noebulletmolds.com/site/shop/bullet-moulds/358/360-313-fn-ax2/360-310-fn-2-cavity-pb-thumper/
If you have a 358 mold already, I would buy a custom sizer 0.001-0.002 over your groove diameter and size boolits you already have available. They will shoot just fine.
If you don't have a mold...
!!!!!Nobody is saying screw the die all the way in for the caliber the die was designed for!!!!!
The case mouth is nominally 0.008" (0.327") smaller than the FCD desgnated caliber (0.335")
This...
It probably would at that. The FCD can already put a hefty crimp on 30 cal cases. If the 0.327" is loaded diameter, the OP may only need to crimp to 0.329 or 0.330 anyway.
But widening the gaps...
No experience with a hand plier-type crimper, but this is also how the rifle-type factory crimp die works. Is there a way to use or modify the FCD for your cartridge in a standard press?. It would...
The 351 is a bit of an oddball. You definitely need to size down or get a custom mold to shoot as cast. I don't really see any way around it.
What exactly are you considering a carbon ring? Location?
You obviously have a fluted chamber, but what I am seeing rearward if the flutes has me curious if it is a carbon ring or a stepped...
Forum: Our Town
IIRC, Primed brass ships same as ammo, but cannot be bulk (loose). It must be packaged so that the primers are protected from detonation, such as factory boxes or ammo boxes.
Forum: Lead and Lead Alloys
Thank you, this is the information I was looking for. I still need to verify by sending a sample to BNE, or casting a boolit and testing hardness, but preliminary, just wanting to knownif anyone had...
I have a 6" i bought last fall, LNIB. I was looking for a 4", but the 6" still balances well in a Kframe. I was not a fan of the 686 6" 357 I had. It was a bit too muzzle heavy for my taste.
...
I will have to look, but only one code worked for powder. it was the code sent when i signed up for text messaging. None of the AR15, bullet, cngears or other codes worked on powder on sale.
And with a 10% coupon code, price is $21.50 per pound. I ordered 3 lbs just to see how I like it.
Forum: Special Projects
Well, you would have a stepped barrel of you proceed with an encore. The Encore breech uses a barrel diameter of approximately 0.997". You would need to have the breech or entire barrel turned to...
Forum: Casting Equipment
Lead carbonate, previously used in paint decomposes in pure form at 315C/599F releasing toxic fumes.
Lead carbonate is not metallic lead, either.
Forum: Casting Equipment
I would find another reference besides "thisoldhouse.com" Don't believe everything you read on the internet.
According to some scientific references, the vaporization rate of lead is...
Yes, but the Arsenal grooves are crimp grooves. The pic in the OP looks to have rounded grooves, not exactly the same.
Forum: Cast Boolits
A "small" brass ball on a stem, about BB size to reach in from the end of the die to break the edge on the lube holes.
Forum: Case Forming / Re-forming
I used 7.62x39 to form cases for my brother's 501 wsl. I sized the case to the web and used a file to remove the excess brass at the web, careful to not reduce the rim. You end up with a semi rimmed...
Forum: Lead and Lead Alloys
I haven't had a chance to test them. I have a CabineTree, but think they are too wide to fit in the tester. I have been too busy to cast a boolit or melt off a piece for testing.
Forum: Casting Equipment
I have spun the round pins in drill and light polished with flitz or worn out fine emory cloth. Coat with a pencil (graphite) and reinstall. Usually the polish does the trick. The graphite coating...
Forum: Lead and Lead Alloys
Same. There does not seem to be a set standard. Many listings put tin first as 2-6-92, but others list the Antimony first as 6%.
The 2-6-92 seems to be more common.
I figure these are from a...
Forum: Lead and Lead Alloys
First thing I checked was Rotometals website and a few other reloading/ casting supply sites. I haven't seen ingots like this yet.
I do plan to use as hardball (until it doesn't work)
I just...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |