Search:

Closed

There are no hoops that I am aware of.
I have purchased a few private sale molds as well as several from Ebay, NOE and arsenal.
I'm not certain on the price to ship

Yes

I am looking for a hollow point mold suitable for 30-30
170 gr + is preferred but will consider down to 150 gr
Thanks
Jeff

Ok that's kind of what I figured. I just wasn't sure how much spring back the brass would get. If say it expanded to .433" than spring back to .431"
I would assume there will be some or the brass...

Got to the range today with that scout.
Loaded up a bunch of 240 gr xtp bullets I had forgot about, loaded them with 19 gr of 2400 powder. Loaded up some of those comercial cast bullets, they are...

Managed to find cerrosafe and a .430" sizing die just in case. It's a new lee style that looks like the old hammer through die and you buy an adapter separate. Worth a shot I suppose, also found a...

I did manage to find a .429 sizer that I'm sure I can open up to .431
I'm thinking I should do a chamber cast as well if i can locate some cerrosafe. I have never done a chamber cast on any of my...

It got your attention though didnt it. I wasn't even thinking of that when I started the thread.

Ok that is good news.
This rifle really does seem to have a generous size throat. I'll fire a few of these commercial cast bullets I have and see as well. I am really excited on getting this rifle...

I do have a handful of commercial cast bullets I forgot about. They are sized at .430, i can load them up and check the case mouths.
One thing this rifle has a long throat I loaded a dummy with a...

I'm looking for a lee right now. Dont forget I'm in canada most stuff right now is unavailable in this country. Getting one from NOE would cost me near $60 canadian and take 3 weeks to get here. The...

Well I slugged my CVA scout v2 in 44 mag today and found it has a relatively tight bore.
It slugged to .4295"
All my molds I have now cast big for my rossi like .433" or bigger. The only sizer I...

I figured I would update
The scout v2 seems to be very well built, has quite a heavy barrel as well. Locks up tight and feels solid. It has a very nice feeling trigger, light and crisp.
I slugged...

Well I ordered the scout v2
My idea was for heavy cast subsonic loads I think with the 1:20 twist it should work well. Hopefully it has a bit larger bore as all my molds cast .433 or bigger and my...

Do you plan on slugging your bore?
Seems on the threads I have read about this rifle no one has bothered to slug their bore.
I have read these rifles have really nice triggers and I would like to...

I have a chance to buy one of these rifles. Using the search function on here has turned up some older reviews with some good points and some bad points for the rifle.
For anyone who owns one of...

Thanks bluejay

Good in b.c. canada
I hear a fellow from Ontario cant get in

Unfortunately mine only came with the deep HP pins. Would be neat to try the cup point also. They seemed to be plenty accurate from my rather informal range session. I can really see myself liking...

I dont have the hammer with hp pins
I have the MP 44-300 with the deep hp pins. I suppose it would be the same however.

Ya I think you are right, I only shot 3 over the chronograph and had 1434 fps high and 1404 low. I was not impressed
I do plan on using h110 for that bullet.
I do have hollow point pins for that...

With the HS6 and h110 i am using cci magnum primers yes.
The h110 load I could have certainly gone higher the primer looked good. I had 19 and 19.5 gr h110 loaded up but they were unfortunately left...

Got back from the range today didnt get a lot of testing but managed to try out some loads from 3 of my newest molds.
The 270gr hammer plain base powder coated
Average of 5 shots through 20" rossi...

Ok
I'm on the right track than.
I have some loaded up 11.5, 12, 12.5 and 13
I have some loaded up with 11 and 12 gr n350 and looking for one other to try. I might try 800x
800x seems to work...