Search:

22LR Handgun Shoot
Saturday April 8th 2017, 9AM
Jefferson County, WV, IWLA
http://www.iwlawv.org
event and rules
http://iwlawv.org/wp-content/uploads/22shoot-final.pdf
This supervised event is...

The swage dies I have are ground to size, not cut to size.
They are rather precise.
Not easy DIY stuff, unless you have some serious skills.
As far as the press, I use a 1 ton HF arbor press with...

I'm currently using a flat base variation of that bullet from a 4 cavity mold using range scrap.
I have run it with up to 4.0 grains of WST
I am currently running 3.5 grains of WST
I try to keep...

I think you should paste a life size pic of "she who's name shall not be spoken" on it for it's virgin outing
I'll bet you could find one for free on a poster somewhere

>>>Perhaps if more people like yourself and our politicians had more first hand experience with war…maybe it would stop forever<<<

Please be careful making such a statement without knowing...

My statement was more generic than specific
Patton and MacArthur were both cowards that were perfectly willing without remorse (psychopathic) to send masses of young men to their death while facing...

It seems that the media has made hero's out of many of the nut-job butcher/cowards that sent masses of young men off to their death.
I strongly suspect that the person who wrote that article had...

Another old timers hating on the younger generation thread
Seems to happen about every six months or so on here
Me thinks the old timers have selective memory loss of what a PITA they were to the...

I winged one of my pact sunshade legs with a 44 on my last outing
The roll of tape I use for pasting targets came in handy

There is a big difference between a NDA and an assignment of invention.
There are also non-compete agreements that are just as common.

An NDA is common just about everywhere I have worked, and I...

here is a 20% I got in an email this morning

158949

158768

It's expired but I bet they will take it anyway
PM me if you want the full size jpg

If you ask the person at the register nicely they will usually give you the discount without the 20% coupon
Tell them you left it at home on the table when you walked out the door

I use it and have been using on my guns and other things for the last 41 years.
I've never had any of these problems reported here.
IMO - complete nonsense, if all the stories here were true I...

I am a bit of a Ruger MKii fanboy
I'm not really sure those mags are original
The boys on over RFC may be helpful
My experience with longer barrel 22 pistol/revolvers has been that they are a...

I would be inclined to keep anything lead far away from a young child.
The younger the child the greater the impact a tiny amount of lead exposure can have.

Don't worry, you will have plenty of...

If a grumpity kinda guy is making and selling the press I want to buy,
I will buy it as long as it is the top shelf gear I want.

My clients put up with their share of my grumpy moments.
They...

Your 0.024590 cubic inch sample size is too small
The closer the sample size to the drum the less margin for error you will have

>>>>>
22LR
V1 = 3.14159 x 0.113 inches x 0.113 inches x 0.613...

according to master Google there are 231 cubic inches in a gallon
figure out how many 22LR cases fit in a cubic inch, add a margin for error, and you have your estimate

My lab tests are back
It seems my lead level is elevated
I salvage range scrap, cast, reload, and shoot.
I smelt outdoors and cast at the edge of my garage with the big box fan blowing out the...

This setup works for me

http://home.comcast.net/~varmint243/pwpimages/casting-setup.jpg

You are not required to like bullet casting any more than I am required to like golf or Tupperware guns.
Do the things that you enjoy.

I do not cast for fun, I cast to get the consistency and...

shoot those
make some more
repeat

You have never run a lathe before and you did all the turning, threading, knurling, grinding, and polishing to +/- .0001 to make the swaging dies out of high grade steel shown in the pictures for...

a letter T reamer is .358 and is a common size
9mm is a bit small for .357