Good day: There was a thread over on rimfire central about this very thing.
You have to tap the eschueon on the left side out a little bit, insert the screw, the half moon piece into its very tiny...
Type: Posts; User: leadchucker62
Forum: Factory Rifles
Good day: There was a thread over on rimfire central about this very thing.
You have to tap the eschueon on the left side out a little bit, insert the screw, the half moon piece into its very tiny...
Forum: Factory Rifles
Good day: My favorite walking around rifle is tbe rem 660 i have one in .222 for calmer days and one in .243 for windy days.
Z
Forum: Factory Rifles
I just purchased a 1920 reming ton 14a in 30 rem with a Lyman peepsight.
Now to get some ammo made up and do some shooting.
Z
Forum: Cast Boolits
Thank you everyone for your replies.I think I have it figured out,loaded rounds look like a snake that swallowed a big mouse. I'm sure that once this new brass is fired it will have more powder...
Forum: Cast Boolits
Good day everyone:
I am loading some 358156gc in my s&w 586 6", I'm using h110 with a load of 15.2 gr.
I just purchased some starline 357 brass to reload.With a load of 15.2 gr I am having a...
Forum: Cast Boolits
I just casted 200 from my new lee 358-200 mold.
they are beautiful!!
Z
Forum: Cast Boolits
Good day everyone:
So,i just reloaded my very first cast bullets.
I reloaded for my 30wcf 1909 m94 takedown.i cast the lee309 170 fp out of wheel weights with a little 50/50 bar solder thrown...
Forum: Boolit Lube !
Good day everyone:
Well,i'm at the point where I'm ready to make up some lube and go shooting.
has anyone ever used lucas oil treatment as a component in their lube.
Any input is greatly...
Forum: Boolit Lube !
Good day everyone:
I've got a 1909 94 takedown in very good condition,the bore is perfect.
it has a 26" Oct barrel.
im shooting lee 150gr rnfp gas checked.
i was wondering what lube i should use...
Forum: Boolit Lube !
Good day everyone:
I was wondering if anyone has tried minwax paste wax instead of jpw.
i cant seem to find any jpw but have found lots of the minwax stuff.
any input is greatly appreciated.
...
Forum: Lead and Lead Alloys
Good day everyone:
Well,i finally did it.i made my first ingots 110lbs of pure lead.
i work in a plumbing shop and was cleaning up the scrap when i found a 3' section of lead pipe.i kept digging...
Forum: Casting Equipment
good day everyone:
since i now have 3 30-30 type guns (savage m340 .30-30,win m94 .30wcf and a rem m14 30rem) i've decided to start casting my own projectiles.
i thought about one of the lee bottom...
Forum: Cast Boolits
good day all:
i tried trailboss from 6-8.5 gr and found that 6.5 gr to be the most accurate.
but i have another problem.......i installed a williams fp340 on it and now it shoots 3 1/2 " high at...
Forum: Cast Boolits
good day everyone:
i have an old(1953) savage m340 in .30-30 win with some absolutely fantastic factory wood on it.and its a great shooter to boot.
i'll see if i can find a pic or two.
anyways.....
Forum: Factory Rifles
good day everyone:
i also have a savage 340 in 30-30.
it was made june 1953,(6d in little circle),and has the nicest piece of walnut i have ever seen on a 340.
i have also installed a fp340 peep...
Forum: Cast Boolits
good day everyone:
i just finished my first reloads with cast boolits for my 1912 rem m14 in .30 rem.
i got the formula from the lee modern reloading manual.
i've made up 10 rounds.
1st five 23gr...
Forum: Cast Boolits
good day all:
well,my progression with firearms has brought me to your site,and hopefully you very wise people here can help me.
i,ve been reloading for rifle and pistol for quite sometime now,and...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |