Search:

Any sources other than Turnbull for a correct receiver extension? I would like to add a second (round) barrel assy in 25-35 to my 32 Spl half octagon TD without messing with the collector value of...

Well at the risk of being excoriated I am going to state the following:

1. The 22 mag is loaded to the same pressure (SAAMI) as the 22 lr. I have a Stevens 1915 that I fitted with a 22 mag...

I have a bunch of 310 dies complete and incomplete see separate thread under my name. I do have a complete set of 45LC includes the adapter.

The weak point on this action is actually the pin/screw that retains the lever and the link. They are soft steel and the design puts a load in the middle of the pin rather like standing in the middle...

As a slight twist on this theme, I have a Zabala sxs 410 with two sets of barrels. I have shot commercial Brenneke slugs (1/4 oz 114 gr) through both sets hoping for a stroke of luck but they both...

Well taking a closer look my (round) barrel is marked 45LC only ... nothing about 410. And the chamber is a normal 45LC chamber, not a long 410 chamber. But it is threaded for internal choke tube....

I tried cast but then eventually found a jacketed load that shot well enough to hunt with. The load is cci350/21.5 296/Sierra 300gr JSP. Not a magnum load but heavy bullet. Shot a red duiker with it...

I have a 45LC barrel with internal threads, never been able to find a choke tube for it. TC Arms says they are NLA. I notice the chamber is super long (for 410 ctgs I presume) and also I have...

i have a passel of 310 dies few complete sets lots of individual dies. see my prior posts.

For those wanting a custom rifle but not wanting to sporterize an original, we have some P14 actions that have been modified as follows:

- Recontoured to Rem 700 contour, swimming pool welded up...

I have a NIB Texan RT set up for 20ga and about a hundred bushings if anyone needs ..

This is an old but interesting thread. Centurion (Aguila) makes 5mm RM ammo and I can tell you it is murder on ground squirrels way beyond 22LR and somewhat beyond 22 WMR distances. The problem is...

Have a H&H in 450/400BPE that has a .407" groove at the breech end and was originally made to shoot a paper patch bullet "399 bore" according to H&H. The bore may taper some, haven't checked that....

I could use a 577611 to convert to a 585 (577BPE) if anyone has one they want to get rid of! Or a 585 circa 520 grainer would work. Email me if you have one thanks! russ@canby.com

It never rains but it pours. I have found a guy in the USA who will make a correct paradox mold in 20, 16, 12, 10 and 8 bore sizes at around $100 a pop. He is primarily a gunsmith but he makes these...

I got my two molds from Old West today. They made me a .432 320 grain two cavity for a vintage double rifle, as well as a 750grain hollow base 12 ga paradox mold. The molds are brass, beautifully...

[QUOTE=.41LC;809861]Well I did receive it today, it is a two cavity 386200HB for .41 Colt.

It is steel instead of aluminum. [QUOTE]

This is the same stunt he pulled on me ... I ordered...

I use Rem ribbed cases ... they are thick enough and tight enough to grip the (.625") bullet firmly without any crimp at all. I tried brass cases, they looked slick, but they are too thin and after...

I note that the NEI catalog has a footnote "Jesus Christ, The Same Yesterday, Today and Forever".

Given Mr. Fragoso's business practices and general attitude, I scratch my head.

The NEI 20 ga mold I have is #398A "Westley Richards". I don't hollow-point it, so it casts around 500 grains. WR made a 20ga paradox gun called the "Fauneta" I believe, hence the label. This was...

I have located at least 4 other suppliers of a 12 ga Paradox bullet ... Brooks, CBE, LBT and Old West. CBE has 3 variations and Brooks can do HP or flat point. There is no reason to go to NEI for...

It went thru my credit card via paypal ... not sure if that route has any recourse.

Thanks Turbo.

Couple of q's. Any idea what pressure you are getting with R17? I am thinking along the lines of a 20ga sxs gun, fully rifled, probably not as strong as the NEF gun you are using. It...

Paradox guns were made in 10,12,20 and even 28 bore. The smaller bores are rare. The one I have started life as a 577BPE by Blissett, bored out to 20ga choked (thanksfully they left the sights...

Anyone done anything with a 20 ga fully rifled, other than Sabots? How about Truball in a smoothbore 20ga? I have a 20ga paradox (vintage) that shoots 500 gr conicals (NEI mold) quite well but I have...