Thanks for the reply I have almost 8 pounds of Csb1
Type: Posts; User: Saxmann10
Forum: Factory & Surplus Powder
Thanks for the reply I have almost 8 pounds of Csb1
Forum: Factory & Surplus Powder
I have some commercial #1 powder from American reloading
Says to use universal data looking to load 380, 9mm, 38spl , 357mag and 45acp I’ve had good luck with cast target loads for 9mm and 45acp ...
I have powders that will work but was hoping to use the half pound of the Winchester
Just starting to ad 380acp to the reloads. I have small amounts of some Winchester wsf and waap-aaplus
Cant find load data. I also have other powders and a lot of commercial #1
Wad is from ballistic product L078 lightning same as the pt1215
I have a modified and will pick up a ic and try both
What’s is recommended for a choke for a lee 1oz slug
IM - MOD or a rifled choke.
Is it possible to reload 12 g shells for farm pest noise only loads
The cost a fortune to buy and i reload myself so looking for any advice
Thanks again
Wanting to start reloading for a pre 1950 winch 94 32sp
I havelee molds. Any recommended cast bullet
And powset load data
Wanting to start reloading for a pre 1950 winch 94 32sp
I havelee molds. Any recommended cast bullet
And powder load data. Thanks
Forum: Casting Equipment
Would lee buckshot and slug molds work for casting zinc
I have a lot of zinc ww. Have anybody tried casting zinc buckshot or slugs. Would lee
Molds work for this or would the zinc destroy the mold. It would be for 12 g shells
Forum: Lead and Lead Alloys
I separate the jackets after melting and separate the metal with a magnet. The other ,some look like copper others look like brass. Besides color is there any other way of telling difference. There...
Forum: Lead and Lead Alloys
How can you separate scrap copper and brass bullet jackets After smelting for recycle
Forum: Factory & Surplus Powder
Thanks for all the replies , I post my results when work slows down
Forum: Factory & Surplus Powder
Got a deal on 8# of tac powder. Says it great for 223. I have a savage with 1x9 barrel
anybody have a good accurate load for 100 to 300 yards. I would still ladder test but would like a opinion on...
Forum: Cast Boolits
What oal and powder are you using for the Bersa and lcp. I plan on loading for the same firearms
Forum: Lead and Lead Alloys
When I sift the larger bullet and jackets, a lot of finer pieces flow thru the screen . Tried flushing with water but still misses a lot
Forum: Lead and Lead Alloys
They feed and shoot great. Just thought I could stretch my ww supply out. I have range lead that is about 14bhn and some plain lead at about 5bhn. I have been water quenching after casting then...
Forum: Lead and Lead Alloys
It's ww bhn 14. Just Trying to stretch my ww supply. It's for 45acp. I have been water quenching and then powder coating them. Lee mold 230rn TL.. No barrel leading.
Forum: Lead and Lead Alloys
My cast bullets are weighing more than they should. 230 rn weigh at 240 to 242gn.what do I add to bring closer to 230 grain.i have plenty of pure lead ,coww,stick on ww.
Forum: Cast Boolits
If you can't find load data for a specific weight bullet.Is the next higher weight ok or do you go lower and what do you start at. I just noticed on some of cast bullets molds, the Load data is not...
Forum: Boolit Lube !
great i will try it out and let you know.from what i have read your bll could be the best blend out there. thanks again
Forum: Boolit Lube !
Just started casting 45acp Lee 230 rn tl bullet. Can BLL be used on these micro band tumble bullets and is 1 or 2 coats recommended. Thanks
Forum: Lead and Lead Alloys
would like to start castinghandgun bullets .but cant find any source for lead. all the tire shops recycle and cant sell.what do i do?
I am from jacksonville fl area
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |