Search:

Got a Griz I tried 4227 and it surprised me . best accuracy but not quit the fastest ..... I used a Lee TL swc . My break wanted to lead up ....

Maybe some one should try these https://northamericanarms.com/shop/parts/250-22-caliber-30-grain-bullets-for-cap-and-ball-2/ at https://northamericanarms.com/customer-service/

Single six frames came with two basic hammers , standard , or Bisleys .

I have a Freedom Arms 454 , bought the 454 Rossi . I intend to shoot both 45 Colt AND 454 Casull in the Rossi. yes the chamber needs to be clean to shoot 454 . I use an old 460 case with a saw tooth...

Tex I have a lee die set that works well , for me . When you get your 92 look it over and slug the barrel . Size your boolits accordingly . remember that it is a 38-40 Not a .44 magnum . A chamber...

I had ambitions of a 4 5/8 stainless Bisley .44 special woods loafing gun , but never even got a smell . That would have been a safer choice , than a repop off shore .45 Colt for standard speed...

dubber Watch Gunbroker there is a fellow that sells Automag stuff and he may know if the magazine for 45 Winmag is the same for 10 mm mag . I believe they are but do not own any my self.

Check here http://sixguns.com/tests/tt10mag.htm for a John Taffin revue .

1680 is THE powder for .445 supermag and 300 gr. XTP

Thank you 1 for this place to discus reforming . Next will be how to , stickies for A to B cases . Or why to do that , because it is easier to do this . This will be a very nice place to impart and...

7 mm benchrest to .357 / 45 Grizzly Winchester mag. and .357 Auto mag from 30 06 .

I went to Nome in 94 and took my Freedom Arms 454 Casull . If I were going today it would be be my BFR in 500 S&W

For hand priming which I do very little of , I use a lee hand press and their ram prime . I usually take a die set and an electric scale for load development , at the range .

Me Too !! If there's stretched, oversized primer pockets on cases, there is prolly a reason for it. In nearly 30 years of reloading, I've never seen an oversized primer pocket on brass from...

Mostly new brass , and I avoid once shot 303 brit , and 7.62 Rooshin , because of head space problems with all the surplus rifles out there .

Starting with a Lee "nut cracker" hand press on 30-06 and moved on to a borrowed single stage . I was on a quest to find an easier way , A friend bought a Lee 1000 9mm and my first try at full...

30-30 is a very good choice , I think perhaps .32 win special is even better , as it is more friendly to CBs and can use the same brass . I also believe 38-55 is just as well suited for the same...

My Charter arms liked copper plate/wash ammo . sights are crude but useable if you learn or adjust them to hit .

alex2293 The green on your patch is copper fouling . Hoppe's 9 does remove copper fouling , but slowly . I anointed the bore once or twice a day with 9 , and pushed a clean patch thru until clean...

I use the powder load density ( 50+% ) and watch the powder bar operate , as well as looking at the powder level before putting a projo on . I use a 550b and clear the powder and seat stations when...

I got a Ruger Super Blackhawk 4 5/8 that is my pillow gun . loaded for bear , long with 300 gr XTP and a case of 296 . It has quite a bit of flip and needs an extra hard crimp to keep the bullets...

I shoot the little Lee semiwad cutter .32 sized to .310 and some tumble lube out of my Rock o la and have had no leading .

I use Winchester LP , or to be safe CCI mil spec hard primers to ward off slam fires ,

The guys a right about 9 clean, brush, clean, an anoint , next day all over again , took better part of 2 weeks. foaming work good and a little faster . I did a brit 303 savage dark bore with LSA...

I used to use blue dot in .30 carbine with the little Lee semi wad cutter sized to .310 worked well in my auto mag III and the Blackhawk . I had to back off a .5 gr for the Rock o la for the possible...