Search:

I sent MP message last week and havent heard back. I will wait a little longer and resend

I am hoping some one can point me in the right direction.
Looking for someone that can make steel 2 cavity molds with sprue plates .402 RN Bevel base no lube groove to work on my Machine....

Ill be loading for a 9 super open gun. Needing around 1400fps. Hitech hasnt performed very well.

What is the top end on fps with out gas check for the powder coating?

To finish this Screw up Ill list what happened
The pot they sent with the machine kept blowing the leads off the heating elements when I first got it a couple years ago. They figured out the problem...

I am ordering new sprue plate for the 40 molds I swapped out a couple from another set I had and it made a huge difference. So apparently I have messed them up when I tried to open up the holes. that...

Still getting some pinching and out of round boolits after cleaning up sprue plates and lubing everything. I have adjusted bar back asfar as I can and have it still work.

Ausglock are you using the grease on the rod and the part of the plate that contacts the bar?
Or other places?
Thank you

Thank you. Hopefully Ill get another run in this coming week. I also noticed on the molds at the sprue plate bolt side is smearing and creating a issue too. I will clean and smooth out sprue plates...

Can one of you post a picture of where the sprue plate contacts the cut bar on front of machine. It seems mine is binding up. I believe it is causing the molds to pinch the bullets.

Thanks for your input.
I have had mine fired up 4 times and still issues with molds filling out. plan on increasing temp this weekend.
Do you guys preheat molds with torch?
Ausglock Are you...

Ok I purchased one a while back and I'm just now getting around to getting it up and running.
Going to be running a 180gr .403 and a 147gr .357.
What are some of the bugs that need worked out on...

Did you not get my pm MiHec?

delete

delete

PM Sent

I have 1 in .402. Its a bit heavy but it casts some awesome bullets. Apparently the manufacturer went belly up.

Anybody making 6 cavity steel molds?

Anybody making 6 cavity steel molds?
Admin please remove wrong area.

I have been casting and loading the Lee TC 175 and using my own enamel paint coating. Which that style doesn't have a distinct shoulder either. I haven't experienced any issues with OAL. Not sure why...

I pulled the trigger on the hardline mold. When it arrives I will post some results.
They gave a 4 week estimated delivery time so hopefully in 3 weeks we will have some results.
I'm running mine...

Brendon,
Sorry I had forgotten I had posted here.

First test was the finger nail scrape test it failed at 16:1
Second was the push thru sizer die it failed at 10:1 but success at first test...

https://www.hardlineindustries.com/.40cal-10mm.html

My experience has been with a BB is that it casts better and the biggest note worthy thing IMO is that it allows ease of loading. You really dont want to scrape the coating off when seating. I know I...

With the thousands of coated boolit I have loaded now. I have found it is alot better to have a bevel base. If you can add tht to your design I would definitely buy one