The Ruger black powder revolver uses the .457 ball
Type: Posts; User: Odinbreaker
Forum: Muzzleloading.
The Ruger black powder revolver uses the .457 ball
Forum: Muzzleloading.
I remove nipple"s after shooting cap abd ball store out of cylinder reinstall with anti seize when I shoot after clean and store. I had a gun years ago that was cleeaned well and nipples rusted in,...
Forum: Muzzleloading.
I have a 54 maxi mouldworks well. I like 50 cal hornady bullet in sabot also shoot good in my 1x48 twist lyman deerstalker.
Forum: Muzzleloading.
use a 430 diameter bullet I cast a 300 gr 44 i put in a green sabot with 80 gr of tripple seven powder do all you want easys to clean and deadly
Forum: Muzzleloading.
I hav a CVA 12 ga barrel that came with coke tubes so I bought an improved cylinder tube loads ok through that than I change tubes if needed.
Forum: Muzzleloading.
I don't put a full power flask over a cylinder. One spark big boom. I like a pistol measuring tube. for field I use preladed tubes
Forum: Muzzleloading.
I dis assemble the gun than it is gun parts. take the barrel off if you can remove lock ect
Forum: Muzzleloading.
I have a Lyman Deerstalker 54 cal flint The best powder is 3 ffg you can use it for main charge and in the Pan. I have used 530 RB and 535 Rb just change the patch. Mine will also shoot Powerbelts...
Forum: Muzzleloading.
I use Shockley gold 3 f in my 44 remington shoots will with no build up. I have a nipple wrench with a nipple pick built in really helps
Forum: Muzzleloading.
I have the Lyman Peep on on of my deer stalkers works great I like a T C maxi ball with a felt under the boolit. 400 gr not
ing walks away
Forum: Muzzleloading.
I have 2 Deer Stalkers both 54 one flint with open sights The other a percussion with a peep sight also a T C renegade 54 cal
Forum: Muzzleloading.
In my encore with a 400 gr 458 sized to 452 I use 75 gr Blackhorn in black sabot. recoil is not to bad and good accuracy
Forum: Muzzleloading.
I use 3 or 4 f in the pan be sure and keep the powder in the pan on the out side of the pan so it acts like a fuse.
Forum: Muzzleloading.
I like the old T C Maxi Ball 405 grain 80 gr T 7 or 2 ff Goex in flint will knoc
k down anything
Forum: Muzzleloading.
I bought a solid aluminum rad for my 32 GM barrel. I also have a 36 cal CVA.
Forum: Muzzleloading.
Carry it uncapped have an inline capper tied on a string that is the fastest way to cap.
Forum: Muzzleloading.
I have used boh with out a problem in mine
Forum: Muzzleloading.
I cast a 300 gr .429. 240 .429 I use the green harvester sabot. I cast a 255 gr 452 ise the black sabot I also cast a 400 gr 454 I use the orange sabot or re size to 452 and use the black. All...
Forum: Muzzleloading.
In Wisconsin you have to have a minimum of 40 cal riled for deer hunting. Check your state law
Forum: Muzzleloading.
I have one I will sell also PM me whom ever is looking.
Forum: Muzzleloading.
Traditional Muzzy form Has a 1x70 twist barrel 36 inch that will fit a renegade. under 300.00 that will give you range and thump
Forum: Muzzleloading.
They are going on Traditional Muzzleloader form for 250.00 I had a 54 Renegade with double triggers and a 32 cal G M barrel on sale for 2 weeks for 400.00 not even a bid.
Forum: Leverguns
I roll my cast bullets in motor mica after lubing really helps with leading
Forum: Muzzleloading.
The website in Canada got breech plugs is prbullet. Precision Rifle.
Forum: Muzzleloading.
I have a Cva 36 cal 1x48 RB with 20 gr T 7 good to 40 Yds. 25 Yd is 20 gr for squirrel.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |