Search:

The Ruger black powder revolver uses the .457 ball

I remove nipple"s after shooting cap abd ball store out of cylinder reinstall with anti seize when I shoot after clean and store. I had a gun years ago that was cleeaned well and nipples rusted in,...

I have a 54 maxi mouldworks well. I like 50 cal hornady bullet in sabot also shoot good in my 1x48 twist lyman deerstalker.

use a 430 diameter bullet I cast a 300 gr 44 i put in a green sabot with 80 gr of tripple seven powder do all you want easys to clean and deadly

I hav a CVA 12 ga barrel that came with coke tubes so I bought an improved cylinder tube loads ok through that than I change tubes if needed.

I don't put a full power flask over a cylinder. One spark big boom. I like a pistol measuring tube. for field I use preladed tubes

I dis assemble the gun than it is gun parts. take the barrel off if you can remove lock ect

I have a Lyman Deerstalker 54 cal flint The best powder is 3 ffg you can use it for main charge and in the Pan. I have used 530 RB and 535 Rb just change the patch. Mine will also shoot Powerbelts...

I use Shockley gold 3 f in my 44 remington shoots will with no build up. I have a nipple wrench with a nipple pick built in really helps

I have the Lyman Peep on on of my deer stalkers works great I like a T C maxi ball with a felt under the boolit. 400 gr not
ing walks away

I have 2 Deer Stalkers both 54 one flint with open sights The other a percussion with a peep sight also a T C renegade 54 cal

In my encore with a 400 gr 458 sized to 452 I use 75 gr Blackhorn in black sabot. recoil is not to bad and good accuracy

I use 3 or 4 f in the pan be sure and keep the powder in the pan on the out side of the pan so it acts like a fuse.

I like the old T C Maxi Ball 405 grain 80 gr T 7 or 2 ff Goex in flint will knoc
k down anything

I bought a solid aluminum rad for my 32 GM barrel. I also have a 36 cal CVA.

Carry it uncapped have an inline capper tied on a string that is the fastest way to cap.

I have used boh with out a problem in mine

I cast a 300 gr .429. 240 .429 I use the green harvester sabot. I cast a 255 gr 452 ise the black sabot I also cast a 400 gr 454 I use the orange sabot or re size to 452 and use the black. All...

In Wisconsin you have to have a minimum of 40 cal riled for deer hunting. Check your state law

I have one I will sell also PM me whom ever is looking.

Traditional Muzzy form Has a 1x70 twist barrel 36 inch that will fit a renegade. under 300.00 that will give you range and thump

They are going on Traditional Muzzleloader form for 250.00 I had a 54 Renegade with double triggers and a 32 cal G M barrel on sale for 2 weeks for 400.00 not even a bid.

I roll my cast bullets in motor mica after lubing really helps with leading

The website in Canada got breech plugs is prbullet. Precision Rifle.

I have a Cva 36 cal 1x48 RB with 20 gr T 7 good to 40 Yds. 25 Yd is 20 gr for squirrel.