Thanks for the reply I have almost 8 pounds of Csb1
Type: Posts; User: Saxmann10
Forum: Factory & Surplus Powder
Thanks for the reply I have almost 8 pounds of Csb1
Forum: Factory & Surplus Powder
I have some commercial #1 powder from American reloading
Says to use universal data looking to load 380, 9mm, 38spl , 357mag and 45acp I’ve had good luck with cast target loads for 9mm and 45acp ...
I have powders that will work but was hoping to use the half pound of the Winchester
Just starting to ad 380acp to the reloads. I have small amounts of some Winchester wsf and waap-aaplus
Cant find load data. I also have other powders and a lot of commercial #1
Wad is from ballistic product L078 lightning same as the pt1215
I have a modified and will pick up a ic and try both
What’s is recommended for a choke for a lee 1oz slug
IM - MOD or a rifled choke.
Is it possible to reload 12 g shells for farm pest noise only loads
The cost a fortune to buy and i reload myself so looking for any advice
Thanks again
Wanting to start reloading for a pre 1950 winch 94 32sp
I havelee molds. Any recommended cast bullet
And powset load data
Wanting to start reloading for a pre 1950 winch 94 32sp
I havelee molds. Any recommended cast bullet
And powder load data. Thanks
Forum: Casting Equipment
Would lee buckshot and slug molds work for casting zinc
I have a lot of zinc ww. Have anybody tried casting zinc buckshot or slugs. Would lee
Molds work for this or would the zinc destroy the mold. It would be for 12 g shells
Forum: Lead and Lead Alloys
I separate the jackets after melting and separate the metal with a magnet. The other ,some look like copper others look like brass. Besides color is there any other way of telling difference. There...
Forum: Lead and Lead Alloys
How can you separate scrap copper and brass bullet jackets After smelting for recycle
Forum: Factory & Surplus Powder
Thanks for all the replies , I post my results when work slows down
Forum: Factory & Surplus Powder
Got a deal on 8# of tac powder. Says it great for 223. I have a savage with 1x9 barrel
anybody have a good accurate load for 100 to 300 yards. I would still ladder test but would like a opinion on...
Forum: Cast Boolits
What oal and powder are you using for the Bersa and lcp. I plan on loading for the same firearms
Forum: Lead and Lead Alloys
When I sift the larger bullet and jackets, a lot of finer pieces flow thru the screen . Tried flushing with water but still misses a lot
Forum: Lead and Lead Alloys
They feed and shoot great. Just thought I could stretch my ww supply out. I have range lead that is about 14bhn and some plain lead at about 5bhn. I have been water quenching after casting then...
Forum: Lead and Lead Alloys
It's ww bhn 14. Just Trying to stretch my ww supply. It's for 45acp. I have been water quenching and then powder coating them. Lee mold 230rn TL.. No barrel leading.
Forum: Lead and Lead Alloys
My cast bullets are weighing more than they should. 230 rn weigh at 240 to 242gn.what do I add to bring closer to 230 grain.i have plenty of pure lead ,coww,stick on ww.
Forum: Cast Boolits
If you can't find load data for a specific weight bullet.Is the next higher weight ok or do you go lower and what do you start at. I just noticed on some of cast bullets molds, the Load data is not...
first order arrived the other day. best packing and lead. definitely will purchase again. hope they fixed your truck
thanks again Kathie
saxmann10
mark in florida
Forum: Boolit Lube !
great i will try it out and let you know.from what i have read your bll could be the best blend out there. thanks again
Forum: Boolit Lube !
Just started casting 45acp Lee 230 rn tl bullet. Can BLL be used on these micro band tumble bullets and is 1 or 2 coats recommended. Thanks
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |