Search:

I agree we shouldn't beat em with book work , BUT as Three`s said it takes the persons initiative to want to learn .

As the ole sayin goes "you can lead a horse to water".

I`ve introduced many...

Ifin the person won`t read the ABC`s of reloading then intrest span does not meet the need for a shooting addiction.

I usually stop listening when a person calls a round of ammunition a bullet & a...

OK , here we go , first anneal the max case as it will spring back & won`t fit into the throats of a 357 mag chamber (wheel gun)

Size em in the 222rem die to the shoulder of the die , no further...

Light loads in 20 ga??? Greendot will be your friend , burns completely at lower pressures & you can go crazy low in shot weight.

I put cards in a 3/4 claybuster wad & went down to 1/2 oz .
...

Chris do you build the die removal kit , I`ve moved my reloading benches & misplaced dies & kit .

Wanna purchase the removal kit first as the one I had was sorta rigged from washers , then maybe...

The problem with gas checks is it`s more prone to cause a hole in the center of the pattern.also too much push powder will do the same.

Size the max case in a 222 die & the check is too large to...

I cut over powder / shot cards from cereal boxes , just double the powdercards & glue in the shot card.

I have both molds ,358156 in plain base (dehorned) & dehorned in hp. Love the boolit design but it does`nt lend itself to bunny poot loads , reduced lead loads yes but low pressure loads NO

The...

Go to the hobby store & find the foam pads they have different thicknesses & colors

I sharpened a piece of 1/2" pump pipe with a hole to punch em out. clamp it in a vice & smack it with a rubber...

870 youth 20ga & 1/2 oz handloads ,it can be done .I loaded 25 shells & scored as good as 7/8 oz loads. these had what felt like 0 recoil in my 6.3 lb o/u & my oldest girl which doesn't like recoil...

Ifin ya wanna fix em up I`m sure someone on shotgunworld.com can point you in the right direction.

Not sure but I think PACIFIC took over TEXAN , then HORNADY took over????

GP100man

I live in the coastal NC area we have all kinds of no legs slithering around & I`ve found this loading to glue em to the dirt , dead rat now!
when ya first shoot this load it`ll seem benine at first...

Green dot is the powder to use , fluffy & easy to ignite. I use a mec 22 bushing for 13.2 gr .
Now the hulls . WW AA hulls has the least volume, thicker & the base is a bit higher , this helps with...

Just a heads up , there`s a guy over on shotgun world with 25# of #12 shot wondering what to do with it !!

Go buy it or trade em summtin he can bust clays with .

In the shotgun reloading...

I have the NOE single crimp groove ,1 cavity PB & the other GCed , guess which 1 gets used the most ?? ,that`s rite the PB 1 & the guns & I like the solid. Mine drop out dressed come close to 187gr....

Ok fellers I got it cleaned up 1 more time ,Im either gonna cast some buckshot or burn this mold up the Wknd.

Cold mold ,or too cool , I thought I was reading the lead rite but just couldn't bring...

Fellers I`ve melted lead & alloys for a while now & got purty good results & a lot better since joining :cbpour:

But I`ve met my match , This buckshot mold that casts 3 balls at the time is...

Question . As you are loading do you go thru the steps with 1 case at the time or sort of progressively, move each hull from station to station ?

I tried the progressive way & found the sizer...

Check out BC Gunworks over on Ruger Forum.com , other than the cyl. release ya can hardly recognize it as a GP100.


http://www.baysidecustomgunworks.com/

1 of my 6bangers pins slid back & didn't find it until I was lube sizing, I removed the pin & peened the hole with a self powered center punch (2 rows of 8 peens) then peened behind it to ensure no...

Ifin I had to have only 1 for each , the 0le dirty-30 would get the 311041 & the GP would get the single grooved 360-180 PB.

I have both molds ,& while my dirty-30 is micro grooved , it does well...

4" GP100 357 Magnum , In NC you can use it for hunting , some states put limitations such as power factors & barrel lengths for handguns.
Handgun hunting takes discipline & good shot placement(with...

Use the data for the 358429 slug . what powder ya gonna use ?? 12gr. of 2400 would be a good startin point.

I run 12-12.5 under 158 gr. slugs to 187gr. rnfps thru my GPs no problems & nuttin...

IDEAL/LYMAN 357443

http://www.three-peaks.net/bullet_molds.htm

1 of the early attempts to design a boolit with a crimp groove for the 357 magnum.
...

Most designs came from shooters , some not even affiliated with a company, Ray Thompson designed the 358156 & it has stood the test of time & shooters. Some shooters were affiliated with companies...