StuBach,
Thanks for the additional information, enjoy you grandfather's moulds.
Best regards,
What Cheer
Type: Posts; User: What Cheer
StuBach,
Thanks for the additional information, enjoy you grandfather's moulds.
Best regards,
What Cheer
StuBach,
Would you tell me please, what is the O.A.L. of the bullet from your 429422 HB mould?
Thanks, and best regards,
What Cheer
Cord,
If you would please, can you post a photograph, of both sides of your 429422 HB with the captive HB pin? I would be very interested in the markings on the blocks.
Also what is the O.A.L....
If any forum member casts the Cramer No. 7, .44 Cal. SWC PB bullet I would like to purchase a few as cast, unsized and unlubed bullets.
I have been looking for this mould for quite awhile,...
PJP,
Thanks for the additional information regarding the time frame of the moulds.
Best regards,
What Cheer
PJP,
Would you tell us please, the time period that you supplied the 'Prochko' Keith moulds and bullets. I have been researching the history/chronology of Keith's bullet designs for several years...
FN,
If you would please, it would be very helpful to those of us that will be looking for these moulds if you post the numbers of the .41 and.45 moulds you have. The numbers on the boxes, and the...
Bob,
Would you post the OAL of the bullets from your new mould, and the one you got from Lead Head in 2005? Neither one look as long as the original RCBS 44-250-K from the 1990's.
Thanks, and...
I have been using Saeco moulds for 25+ years and have never had one that would not cast a good bullet including ones that only had venting on one block face. Not unusual to find original Saeco moulds...
Forum: Reloading Equipment
HGS,
I would be interested in the characteristics of the powder measure you refer to as a second model.
Thanks, and best regards,
What Cheer
Gentlemen,
Thanks for the information. My primary interest is in the 310 tools, but was curious about the Tru-Line Jr.
Best regards,
What Cheer
Pavogrande,
There is another decapping rod_ .395X30 thread .205 rod with a 6-48 Decapping pin nut. I have several decapping chambers with this rod.
I also have a Lyman Ammunition Maker set in...
Froggie, an excellent explanation of the dies.
When Lyman changed the 310 sets from 5 dies to 4 dies in the early 1960s, we believe, the CMR became a standard componet, and it still is.
Best...
Would like to know the production period for the Tru-Line Jr. Press, and also when was the compound linkage introduced?
All help is appreciated.
Thanks, and best regards,
What Cheer
The original die sets for the 310 tool were 5 die sets. Sometime in the early to mid 1960s Lyman changed to a 4 die set for the 310 tools. The 5 die sets have a decapping chamber (die), and a muzzle...
richhodg66,
If you got the .22 Hornet set that was on the WTS board recently, the seller said it had the adapter die.
I have an extra set of small aluminum handles, if you need them send me a...
The steel handles with my .22 Hornet set are also very close to the small size. I have seen several aluminum handled Hornet sets and they have all had small handles.
The adapter die is number 4.
...
My steel handled .22 Hornet set is also very close to the small handle size. The aluminum handled .22 Hornet sets that I have seen all hAve had small handles.
Forum: Reloading Equipment
CH4D has expander dies and plugs for any diameter you require. I have been using their dies for twenty years and have always been satisfied with the results. They are a good company to deal with.
...
I understand that the best way to measure cylinder throats is with pin gauges.
My question is how accurately can the throats be measured using vernier calipers. Has anyone tried this and checked...
Can anyone provide the Handloader issue number for the December, 2013 issue that has the Brian Pearce article on the Keith .44 bullet mould?
Thanks, and best regards,
What Cheer
Forum: Classics & Stickies
These Scovill ferrules were used on Saeco mould handles. Your handles appear to be Saeco handles that have had the wood portion shortened.
Best regards,
What Cheer
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |