magma off a mark 8
Type: Posts; User: Hammerlane
Forum: Lead and Lead Alloys
After to speaking with "the guy" counter weights and motor shielding used in CT and MRI machines. Each machine has close to 1000 pounds of which is 500 pounds of extruded bricks. just baked a couple...
Forum: Lead and Lead Alloys
:) Small Lead find at the scrape yard 8000 lbs. Very hard lead like 3% + Also found the guy dropping it off. That was the better find. He has 32000 lbs that he will scraped over the next month....
Forum: Lead and Lead Alloys
Any where close to the Carolina's and you want to share
Forum: Lead and Lead Alloys
312112 Back in the day.. No telling how many PO Workers I put on Workman's Comp.
Over the year have only lost a few to damage. I cut out of cardboard a second and third layer inside the MFRB. Use...
Forum: Lead and Lead Alloys
Right now S1.95 Mayco Hard ball. Just bought 10K Smaller amount $ 2.20 they have a couple locations Birmingham AL and Granit City MO
Forum: Lead and Lead Alloys
Was offered a 55 gal of old WW at the scrap yard $ .15 per pound. yesterday.. Had to pass but the top layer looked good. I don't have that kind of time now. Looking after our 2 year old...
Forum: Lead and Lead Alloys
Scrape Yards Currently price of lead is falling, that's why you free shipping from Rotometal Pickup 4000 pound yesterday alot the pieces were mark 4% antimony came from machinery and counter...
Forum: Lead and Lead Alloys
.75 per pound. Never leave home without enough CASH to pay for what you may find. If I ever get pulled by the PO PO I have plenty of Pics. Don't want to have to explain carrying that much Cash.
Forum: Lead and Lead Alloys
When it's on the frame there is no where to go. 4300 pounds of hard lead. A lot the pieces are stamped 4% Antimony
Scrap yard find.
Forum: Lead and Lead Alloys
I am in the process of cutting up a 1940's sailboat keel and it cuts like butter. Some of the softest lead I come across. I have had a keel that had rebar in it. So anything goes in making a keel....
Forum: Lead and Lead Alloys
mayco is $ 2.00 a pound you pickup in AL
Forum: Lead and Lead Alloys
I use a Cajun banjo with a 55 gal barrel cut in half, as the wind shield. Also cut a hole in the top which is 1 inch smaller than the pot. Cut a lid from the bottom half not used. This way all the...
Forum: Lead and Lead Alloys
Here in my Small Mill Town there are plenty of lead pipes getting replaced. Just because they are getting placed does not mean they are getting removed. Spoke with a couple of the Contractors over...
Forum: Lead and Lead Alloys
Here in my Town Replacing lead pipes means adding a new line leaving the lead in the ground. They are not taking it up. Causes more problems.
Forum: Lead and Lead Alloys
I think this deal is done. Thanks for all the help.
Forum: Lead and Lead Alloys
Free Lead High Antimony content Jacksonville FL local pickup only. I sale lead to a Fishing Tackle maker in Jacksonville FL and somewhere in the mix some High Antimony Lead made its way into the...
Forum: Lead and Lead Alloys
Just spoke with the foundry this was there response
On the 6% Sb I have an alloy that ranges from 6-6.5% Sb and1.1- 1.5 ppm As in it, but it only has a .0003 ppm as for as Sn goes though
No much...
Forum: Lead and Lead Alloys
If you are buying pure lead reach out and I will give you some info
JRYounts@gmail.com
Forum: Lead and Lead Alloys
Right now I would not buy anything shipped from China. The freight rate on the water is the highest it has ever been and stuff gets canceled at the blink of on an eye. ( 1st hand ) Maersk just had...
Forum: Lead and Lead Alloys
2000 bundle Min for Nathan trotter and Victory white wants to sell you bricks which is high. once you melt the brick is the same as a poured ingot. Shipping is the biggest issue in this whole deal. ...
Forum: Lead and Lead Alloys
Here is a source I have used in the past ( last year ) https://nathantrotter.com $ 1.65 shipped hardball
Forum: Lead and Lead Alloys
i put large pieces on top of my cast iron pot and hit it with a weed burner. no chips, drips right in until it fits. biggest piece so far 4 ft x 4 ft 1/4 inch thick. before that I would use the weed...
Forum: Lead and Lead Alloys
Monster Truck Wheel Weight found today 63 pounds any info on the Foundry would be helpfull
Forum: Group Buy Discussion
is this going to be a paypal thing or a CK or MO thing Thanks Rob
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |