Search:

The big problem is the BATFE makes "rulings" not "laws" its how they want to interpret the "law" at that time ....

They have made at least 3 different "rulings" on the "Sig Brace"....and just...

I have less than a pound of a 16# keg of Bullseye given to me in 1968 by a old lady on my paper route her husband passed away in 1955...it still works great in 38 wadcutters....going to need to break...

Kroil I have a can on every bench in the shop never out of a arms reach....I've restored antique cars and motorcycles for a living the past 45 years....thanks for a new use bullet molds........

I use a Williams Gunsight primer pocket preener.....it will tighten up a loose primer pocket.....

I put 2 tablespoons of graphite in bag BPI plastic buffer material run it in my tumbler. ....then add buffer to buckshot loads...run on my vibrating table.....then crimp.....

I've loaded 357 wad cutters hollow base out.....never crossed my mind with a Lyman 525....:twisted:

Thanks....I guess I'll just shoot it to make sure it doesn't get in the wrong hands.
It does seem pretty hard, if you break a piece of it there's seems to be crystals, hit a ingot with a hammer has...

I have 3- 80+ pound ingots of this, the price was right at free. Had the local scrap yard shoot it with a gun this is what they came up with.

LEAD.......... 88.93
BISMUTH.....4.28...

They might need to raise core charge on batteries higher than the $10 they get now. If scrap yards pay any more.

In the late 80's into the mid 90's I made 1000's of lead shot bags of vinyl 6"x12" with 1 1/4" nylon handle straps for photo, movie and display props, for weights. I would get 55 gallon barrels on a...

Are they from 1/2 jacketed bullets ?

It might be from a air gun pellet. I had some pellets in .22 caliber in the 80's that were white plastic outer with center stainless steel.

Please excuse my lack of knowledge of metallurgy, what would be the problem with Zinc in casting metal ?

This is a great idea instead of sending 9mm brass to scrap yard...

7mm BR from 308

I have a 6" slitter blade for my table saw to cut brass

I used cream of wheat and bullseye back in the early 80's

I'am new to casting but a reloader for 40+ years. I have 3- 80 lbs. + ingots of hard lead they have been sitting in the garage for 20+ years.
The pencil method should give me a ball park start to...