Search:

Well its the wife's fault.
She asks me every year what I want for Christmas and I have always said (for the last 30yrs) I really don't need anything spend it on the Kids/ Grand Kids, this year a few...

No sand used just the tire treads and stall mats added advantage you take tires and mats out boolits are mostly laying in the bottom have to pull a few out of the tires with pliers
It’s easy to...

264770264771264772264773264774

This is what I came up with a few years ago the flat rubber are stall mats from tractor supply and the tires are after I cut the side walls off and a 1/8" steel...

I built a 24 x 40 building this past summer used these am very happy with them $25 a pop
https://www.amazon.com/gp/product/B0728P14FR/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

the receiver is already drilled and tapped for a mount on the left side
I was just looking to make it look like it did many years ago
Thanks
Tony

Ok since we are on the topic of Rem 500 series dose anybody know were I can find a scope mount for a 511 score master I know dad had one for his at one time it mounts on the left side of the receiver...

Had a buddy in our group got knocked out by a Snow Goose but no real damage just a nap

I have Built and installed MANY Sets of cabinets and I will say this ..... Before I would deal with Lowes/Home Depot, I would talk to a few local shops and compare Apples to Apples.
Tony

Well been out playing in the snow last couple days I estimate we got 9-10 inches hard to tell will all the drifting we had the constant 30 - 40 mph wind with gusts well over that.
Got the neighbors...

toallmy I am with you, sitting here drinking coffee watching the news and listening them use their serious voices telling you how bad it is I have to laugh
what sucks worse then the snow is Fri and...

SnowWolfe
I am kinda simple minded so I would approach it this way
6x30x8.3=1494 lbs of buoyancy 9=2241 lbs so if you load 1494 on 6 barrels you would be floating but right at the surface of the...

Josh Abbott is the guitarist the OP is about Jason Aldean

I got tired of looking at the ring on the nose of my 308 bullets so used hot glue, paste waxed a bullet filled the seater pushed bullet in rolled on glass (I have a piece of glass 12"x12") to see...

Marlin 336 in 35 Rem
Get a RCBS 35-200 mold, size .359 and put the appropriate powder behind it and watch one hole appear
I have slugged barrels, not hard to do just make sure soft lead and lube...

My Son has a 03 F350 with the 6.0 and I now know entirely to much about 6.0's more than I ever wanted to.
We have bullet proofed it, APR head studs, Tuner, EGR Delete, Hipo Oil Pump, Oil Cooler,...

I have a set of these on my bandsaw I like them

https://www.amazon.com/WoodRiver-141550-Retracting-Casters-Set/dp/B0035YAT6I
Tony

+1 ^^^^^^
I would send that barrel to DougGuy let him work his magic on it and I bet your leading problem goes away
Tony

I have a 1100 that I had a 30" full that I took to a local gunsmith and he sent it off had it cut to 26" (handy in the duck blind) and had it cut for chokes (true choke is the tubes they used) work...

one suggestion bleach and ajax dish soap w/ water in the pump up sprayer and when you put the soap on start at the bottom and work your way up or you will end up with run streaks on your siding ...

I beg to differ I have owned boats as soon as could buy the first one will never be without at least one, most days I would rather be on the water than on land.
I may be the exception to the rule...

LOL I can tell you what a free Gun has cost me
A friend of mine who is a caster gave me a stevens 200 in 7-08. Up to this point the only rifles I had were 22's a 17 HMR and a 204 Ruger Delaware is a...

I use the Caldwell Rock Solid very good rest especially for the price.
...

to many to list but drive
2002 F150 everyday
Tony

P.S. TexasNative46 The 6.9 is all but bullet proof Have a 1985 F350 Dump truck. just not a lot of power to spare with them LOL

How old is the unit?
was it working then all of a sudden developed this problem?
I just went through this with a unit that is about 5 years old ended up being a sensor in the head unit (rpm Sensor)...

Congrats POPS Welcome to the Club
Tony