I have that same pot. Need to get the skirt added.
Type: Posts; User: leeshall
Forum: Casting Equipment
I have that same pot. Need to get the skirt added.
Forum: Casting Equipment
This is the one I decided upon and have ordered. It's got all the features I wanted and will hold up to a 162 quart pot of water capacity (over 300#).
...
Forum: Casting Equipment
Minerat, Thank you very much for your suggestion. I was looking for one with a "jet" type burner. The folded, sheet metal legs on your illustrated burner is what I'm leery about being strong enough...
Forum: Casting Equipment
I am requesting advice on locating a propane powered seafood/turkey fryer type burner that will last a long time and be heavy duty enough to not collapse and dump 200+ pounds of molten lead on me yet...
I've used it for years on leather slings. I apply it with an old toothbrush and a hair dryer. The heat makes the Sno Seal soak into the leather very well. Keeps slings from drying out and getting...
Forum: Reloading Equipment
Works great with current Dillon seating dies. Won't work with older dies.
http://www.uniquetek.com/product/T1561
Forum: Case Forming / Re-forming
I use this
https://annealeez.com/ along with Tempilaq. Quenching in water is not necessary and just makes a mess.
Forum: Case Forming / Re-forming
I had about half a five gallon bucket of that Austrian 5.56 brass with the tiny flash hole. I placed this tool
https://www.midwayusa.com/product/101759217?pid=635539
in my drill press and opened...
Forum: Reloading Equipment
Try this long handle release magnet.
https://www.harborfreight.com/long-reach-magnetic-pickup-tool-with-quick-release-93950.html
If you want to try this boolit before purchasing a mold, Bayou Bullets offers their Hi-Tek coated version of this bullet in both .356" and .358" diameter. IIRC Donnie used this boolit in a 1911 in...
Forum: Reloading Equipment
Who makes custom case expanders/funnels for Dillon powder measures for use with cast bullets larger than the traditional sized jacketed bullets for caliber? Something incorporating the "Lyman step" ...
Forum: Factory & Surplus Powder
I am still using Bullseye in the little metal cans labeled Hercules. Made long before the name change to Alliant. I also have Red Dot, Green Dot, Unique, 2400, and, I think a bit of Herco in the...
Jerry Clower coon huntin' story.
https://www.youtube.com/watch?v=ev0li6_fFfo
Can .32ACP cartridges be safely fired in a .32 Long S&W or Colt revolver in good condition?
Forum: Reloading Equipment
I use this one:
https://www.harborfreight.com/long-reach-magnetic-pickup-tool-with-quick-release-93950.html
Works great.
Forum: Lead and Lead Alloys
Dusty you are right - &#@% happens. These wheel weights have been stored indoors in a dry place for many years. No place for moisture to hide. However I'm gowned up and have a face shield and welders...
Forum: Lead and Lead Alloys
The exact (borrowed) pot, burner and ladle I'm using can be seen here :
https://www.youtube.com/watch?v=PSgQ82Kqhzo
I'm not at all concerned with trapped moisture with the wheelweights (both...
Forum: Lead and Lead Alloys
With the amount of steel clips generated it's not practical loading the pot to overflowing with clip on wheelweights and just melt it down. I start with about one inch of frozen lead from the...
Forum: Factory & Surplus Powder
2200 was originaly introduced years ago as a surplus powder. The 2200 available today is newly manufactured. Maybe the two have slightly different burn rates? Maybe the corporate lawyers bumped down...
Forum: Lead and Lead Alloys
Yep - lowering the temp made the melt take a bit longer but makes the chore much more pleasant and uses much less propane. Glad I found my ancient Lyman thermometer from many years ago.
Forum: Lead and Lead Alloys
Made this melt/pour yesterday (Sunday). Started late afternoon about 3PM. Notice the amount of steel clips resulting in 149 ingots is just about the same in volume as the lead yield. Took everybody's...
Forum: Lead and Lead Alloys
The clips from the wheelweights go bye bye. Any slag or clips that have any lead stuck on them plus any spills and the flash clipped off the ingots goes back in the pot with the next melt. Don't want...
Forum: Lead and Lead Alloys
osteodoc08, You hit the nail on the head. I dug out my ancient Lyman thermometer for my last melt/pour and it pegged at 900F. No wonder I've been using so much propane! Good thing I was super careful...
Forum: Lead and Lead Alloys
This is 100% clip on wheelweights. Didn't think the pure lead would seperate and float on top. The ingots are plenty hard.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |